Cubase 8.0.10
-
- New Member
- Posts: 10
- Joined: Thu Feb 17, 2011 12:41 am
- Contact:
Cubase 8.0.10
NEW 8.0.10 crashes on start up. Anyone else having this issue?
- silhouette
- Senior Member
- Posts: 1298
- Joined: Fri Jan 14, 2011 12:45 am
- Contact:
Re: Cubase 8.0.10
I am afraid that a lot more info is needed.
Computer/System/RAM/soundcard?
32/64 Bit?
You might find it useful to add this information to your signature.
I you are using 64 bit a 32 bit plugin could cause this.
Follow the progress of the project loading window and see where it stops - that might give you a clue.
My guess is that it is a plugin as this mirrors my experience.
Computer/System/RAM/soundcard?
32/64 Bit?
You might find it useful to add this information to your signature.
I you are using 64 bit a 32 bit plugin could cause this.
Follow the progress of the project loading window and see where it stops - that might give you a clue.
My guess is that it is a plugin as this mirrors my experience.
Intel core i7 5960X CPU 3.0 GHz 64bit 32 gig RAM - Windows 10 - AMD RadeonHD 7700 - RME Fireface UC - Cubase 8.5.20/9.0.1 - UAD Solo + Duo + Quad - Nektar Panorama P1 - Komplete 12 - All uhe - Adam AX7 + Adam Sub 8 - BFD3 - Alchemy - PSP - FabFilter - Fender Telecaster- Wudtone Strat - Gibson L4, 335,330L,175 -Ibanez PM100 - Musicman Silhouette x 3 - Warwick Thumb Bass - Kemper Profiling Amp -https://soundcloud.com/silhouette-17
-
- New Member
- Posts: 10
- Joined: Thu Feb 17, 2011 12:41 am
- Contact:
Re: Cubase 8.0.10
Oops, sorry, it was an early morning. Operating on a Windows 7 64 bit, plug ins are both 32 and 64 bits. Soundcard is external - Focusrite 18i20, 8gb ram. No issues like this since Cubase 6.0. Ive been using Cubase for a while, so I'm familiar with all the basic troubleshooting steps. At this point I can't even run the initial start up after installation to reload all plug ins. If no one else seems to be having this issue I guess It's time for a total reistallation.
Last edited by wardog0873 on Sat Mar 14, 2015 6:54 pm, edited 1 time in total.
-
- New Member
- Posts: 10
- Joined: Thu Feb 17, 2011 12:41 am
- Contact:
Re: Cubase 8.0.10
*UPDATE*
I did a clean re installation, loaded the plug ins, was able to load a session, than it crashed. Close the program, then tried to load it again, this time, it couldn't even complete the scanning of the plugins. I will try to load a session again without plugins to find the culprit. It should not be this difficult. I had no issues with Cubase 8.0 or 8.05.
*Another Update*
After starting up Cubase 6.5, I noticed that it crashed at the same point as the Cubase 8.0.5. I determined that it's my Slate plugins. All of them. After removing the Slate plugins, both Cubase versions started with no problem. So there seems to be an issue between Slate and Cubas 8.
I did a clean re installation, loaded the plug ins, was able to load a session, than it crashed. Close the program, then tried to load it again, this time, it couldn't even complete the scanning of the plugins. I will try to load a session again without plugins to find the culprit. It should not be this difficult. I had no issues with Cubase 8.0 or 8.05.
*Another Update*
After starting up Cubase 6.5, I noticed that it crashed at the same point as the Cubase 8.0.5. I determined that it's my Slate plugins. All of them. After removing the Slate plugins, both Cubase versions started with no problem. So there seems to be an issue between Slate and Cubas 8.
-
- New Member
- Posts: 10
- Joined: Thu Feb 17, 2011 12:41 am
- Contact:
Re: Cubase 8.0.10
*UPDATE* PROBLEM SOLVED
Contacted Slate regarding this matter and these instructions solved my problem. Evidently all Slate files were not erased when uninstalled, thus causing my problem when trying to reinstall plugins. Not all issues are the same, but I hope this helps at least one person out there.
Thank you for contacting Slate customer support. Please try the following:
1) Please uninstall VMR using "Programs and Features"
2) Delete the following information found in C:/ProgramData (note: this folder is hidden by default.)
Virtual Mix Rack folders (FG-S, FG-N, FG-401, FG-116, Revival, Virtual Mix Rack, etc…)
Virtual Buss Compressors (all folders associated)
Virtual Tape Machines
3) Restart your computer and use the following plugin builds: (these are just the lastest issues of the plugins)
Contacted Slate regarding this matter and these instructions solved my problem. Evidently all Slate files were not erased when uninstalled, thus causing my problem when trying to reinstall plugins. Not all issues are the same, but I hope this helps at least one person out there.
Thank you for contacting Slate customer support. Please try the following:
1) Please uninstall VMR using "Programs and Features"
2) Delete the following information found in C:/ProgramData (note: this folder is hidden by default.)
Virtual Mix Rack folders (FG-S, FG-N, FG-401, FG-116, Revival, Virtual Mix Rack, etc…)
Virtual Buss Compressors (all folders associated)
Virtual Tape Machines
3) Restart your computer and use the following plugin builds: (these are just the lastest issues of the plugins)
-
- New Member
- Posts: 5
- Joined: Wed Oct 26, 2011 7:54 pm
- Contact:
Re: Cubase 8.0.10
Thanks for posting your update wardog0873, you have indeed helped at least one person out there
I was having the exact same problem with my Slate plug-ins. Followed the details you got from Slate and now my 8.0.10 is loading up as expected!!! Thank you!
-Barry

-Barry
Cubase 8.0.20 64-bit / 7.5 64-bit; Win 7 SP1 64-bit; Intel Core i7 2.80GHz; 16GB RAM; Focusrite Saffire PRO 40
- jono not bono
- Member
- Posts: 565
- Joined: Thu May 09, 2013 11:43 am
- Contact:
Re: Cubase 8.0.10
I'm about to buy the Slate Bundle so thank you for the heads up. Slate Plugins are far too great to not own! So far, for me, C Pro 8.0.10 is amazing. However, each of us use Cubase in different ways so there could be an issue or new problem lurking in a Digital Corner somewhere. When C Pro 8 was first released, I was getting CPU Spikes and Cubase was crashing as you have described but I made sure everything was cleanly installed (including all latest drivers and Bios etc) and then made sure all of my plugins were installed properly. Cubase 8.0.10 is by far the best and most stable version of Cubase I have ever used. Can't wait for the next update which will, hopefully, fix issues with VEPro 5 (amongst other things).
Please make me stop buying stuff.
-
- New Member
- Posts: 10
- Joined: Thu Feb 17, 2011 12:41 am
- Contact:
Re: Cubase 8.0.10
I too having experienced all Cubase versions have been impressed by the latest versions. I own all the plug ins and waves and Slate are my go to. There's something that slate captures that other plugins do not. And it's depth and dimension. What I find it lacks is the waves density and punch. However when used together, it's the best. And to bigbluebarry, you're welcome. I scoured the internet and could find nothing but complaints about the same issue, but no results. So when Slate helped solve my problem, I knew there were others out there that I had to get the word to.
Who is online
Users browsing this forum: RichR and 8 guests