Questions on UR44C

This section is about Steinberg's UR-C audio interfaces product range
Post Reply
Giotast
New Member
Posts: 4
Joined: Sun Apr 19, 2020 11:31 am
Contact:

Questions on UR44C

Post by Giotast »

Good morning
I wanted to know if after setting the UR44C card with the DSPMIX software for IOS with the various mix settings, stereo or mono inputs, and other things all these parameters remain stored in the card even after turning it off allowing me to use it in live even without software but with the previous settings ....
Then I wanted to know if setting the inputs 1 ... 6 in stereo I have monitoring both in headphones and in the line and main outputs in stereo
Lastly I am trying the IOS app but I have not yet purchased the card and I realize that every time I close and reopen the app the headset 2 that I had previously switched off turns off ... it's normal
thanks at least I decide whether to buy it

ca-booter
Member
Posts: 294
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: Questions on UR44C

Post by ca-booter »

If I am correct the APP is always in "demo" mode if you do not have the interface, so i guess nothing will be saved
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

Giotast
New Member
Posts: 4
Joined: Sun Apr 19, 2020 11:31 am
Contact:

Re: Questions on UR44C

Post by Giotast »

But what interests me most is that the settings remain in the tab after turning it off in order to use it alone without having to connect it to a PC or iPad

ca-booter
Member
Posts: 294
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: Questions on UR44C

Post by ca-booter »

Yes, I did a quick test, opened the DspFX mixer, a guitar in input 1, loaded a EQ, the Distortionamp and dialed some reverb in.
Then closed the Mixer, shut down the interface and turned it back on without the DspMixer opened.
All settings are still there. Hope this helps
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

Giotast
New Member
Posts: 4
Joined: Sun Apr 19, 2020 11:31 am
Contact:

Re: Questions on UR44C

Post by Giotast »

Great !!!! sure that you have been of help, it was a doubt I had .... And you confirm that I have stereo or mono monitoring on the headphones according to the setting I made for inputs 1 ... 6 ?
Because I had an UR 22 MK II and the headphones 1 and 2 were only mono

ca-booter
Member
Posts: 294
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: Questions on UR44C

Post by ca-booter »

The stereo masteroutput also goes to the headphones, so if your source or inputs are stereo the output also will be stereo.
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

Giotast
New Member
Posts: 4
Joined: Sun Apr 19, 2020 11:31 am
Contact:

Re: Questions on UR44C

Post by Giotast »

Thank you very much for your availability
You clarified my ideas
It is just what I needed.
I really think I will buy this card
Thanks again😉

Post Reply

Return to “Steinberg UR-C Series”

Who is online

Users browsing this forum: No registered users and 0 guests