Scrolling in Mixer modifies values

Post general topics related to Cubase Pro 8, Cubase Artist 8 and Cubase Elements 8 here.
ultradust
Member
Posts: 250
Joined: Tue Jan 08, 2013 12:37 am
Contact:

Re: Scrolling in Mixer modifies values

Post by ultradust »

This needs to be fixed.

User avatar
DTS Recording Studio
Junior Member
Posts: 140
Joined: Tue Jan 26, 2016 12:40 am
Location: Bordentown, New Jersey USA
Contact:

Re: Scrolling in Mixer modifies values

Post by DTS Recording Studio »

djstyleee wrote:I have demoed Cubase several times and really like it but theres one thing I just cannot get used to. I use a magic mouse and if I am say in the mixer, and want to scroll across the mixer if I am anywhere near pan or sends etc I end up adjusting that parameter, same for up/down scrolling on faders. I do not have this problem in any other applications I use. Even close to a parameter for a split second and it is active, is there anyway to disable or adjust this setting, I would rather knob/fader scrolling only to be active after I have actually clicked on that particular parameter or when hovering over the actual knob/line etc or even not at all. The fader could be at the very bottom, I could be at the very top and right over the other side of the channel and it still moves the fader when scrolling.
Is there any preference settings or workarounds for this? I have messed around with the 'controls' in prefs but they didn't help. Surely I am not the only person who dislikes this?
+1 +1 +1 +1 +1 +1 +1!!!
"An Optimist says that glass is half full, a Pessimist says that glass is half empty...an Engineer says that glass is twice as large as it needs to be!"
www.DTSrecordingstudio.com www.facebook.com/DTSrecordingstudio

User avatar
DTS Recording Studio
Junior Member
Posts: 140
Joined: Tue Jan 26, 2016 12:40 am
Location: Bordentown, New Jersey USA
Contact:

Re: Scrolling in Mixer modifies values

Post by DTS Recording Studio »

ultradust wrote:This needs to be fixed.
+1
"An Optimist says that glass is half full, a Pessimist says that glass is half empty...an Engineer says that glass is twice as large as it needs to be!"
www.DTSrecordingstudio.com www.facebook.com/DTSrecordingstudio

User avatar
TweakGeek
New Member
Posts: 24
Joined: Sat May 19, 2018 1:49 am
Contact:

Re: Scrolling in Mixer modifies values

Post by TweakGeek »

+1. This scrolling behavior feature needs to be configurable. Almost 2019 now, on Cubase 10 and still waiting on this. Steinberg please...

User avatar
DTS Recording Studio
Junior Member
Posts: 140
Joined: Tue Jan 26, 2016 12:40 am
Location: Bordentown, New Jersey USA
Contact:

Re: Scrolling in Mixer modifies values

Post by DTS Recording Studio »

djstyleee wrote:
Sun May 31, 2015 5:55 pm
I have demoed Cubase several times and really like it but theres one thing I just cannot get used to. I use a magic mouse and if I am say in the mixer, and want to scroll across the mixer if I am anywhere near pan or sends etc I end up adjusting that parameter, same for up/down scrolling on faders. I do not have this problem in any other applications I use. Even close to a parameter for a split second and it is active, is there anyway to disable or adjust this setting, I would rather knob/fader scrolling only to be active after I have actually clicked on that particular parameter or when hovering over the actual knob/line etc or even not at all. The fader could be at the very bottom, I could be at the very top and right over the other side of the channel and it still moves the fader when scrolling.
Is there any preference settings or workarounds for this? I have messed around with the 'controls' in prefs but they didn't help. Surely I am not the only person who dislikes this?
This is STILL an issue for me. Steinberg, hello????? Anybody home? Seriously.
"An Optimist says that glass is half full, a Pessimist says that glass is half empty...an Engineer says that glass is twice as large as it needs to be!"
www.DTSrecordingstudio.com www.facebook.com/DTSrecordingstudio

User avatar
DTS Recording Studio
Junior Member
Posts: 140
Joined: Tue Jan 26, 2016 12:40 am
Location: Bordentown, New Jersey USA
Contact:

Re: Scrolling in Mixer modifies values

Post by DTS Recording Studio »

TweakGeek wrote:
Sat Dec 15, 2018 4:17 pm
+1. This scrolling behavior feature needs to be configurable. Almost 2019 now, on Cubase 10 and still waiting on this. Steinberg please...
YES, and YES and YES! Just make it so you have to CLICK on a parameter FIRST before you can change it! Or at least if using a modifier?
"An Optimist says that glass is half full, a Pessimist says that glass is half empty...an Engineer says that glass is twice as large as it needs to be!"
www.DTSrecordingstudio.com www.facebook.com/DTSrecordingstudio

User avatar
Dallon426
Member
Posts: 348
Joined: Sat May 04, 2013 8:00 pm
Contact:

Re: Scrolling in Mixer modifies values

Post by Dallon426 »

Annoying.


I also would like to be able to change the direction of my scroll wheel. For instance in pan I would like left to be down on my scroll wheel and up to be right.
I also would like to be able to adjust the scroll bar sizes in the inspector.
Lenovo Legion y730
Cubase Elements 10.5

User avatar
n0nspaz
Junior Member
Posts: 61
Joined: Thu May 02, 2013 10:50 pm
Contact:

Re: Scrolling in Mixer modifies values

Post by n0nspaz »

Xmouse utility (free) (windows only) allows reconfig of mouse motions PER application

https://www.highrez.co.uk/downloads/XMo ... ontrol.htm
Cubase 10 Pro, WaveLab 10.0.30, Win10, CC121, Intel i7 64GB, RME UCX, UAD PCIe x2
Cubase fanboy since the 90s

hesca116
Member
Posts: 480
Joined: Wed Mar 30, 2016 7:17 pm
Contact:

Re: Scrolling in Mixer modifies values

Post by hesca116 »

+1
This is the main reason I don't use the channel strip rack at all. Vertical scrolling on it with the mouse wheel is an utter minefield.

Please Steinberg fix this. Or at least make it a preference. Let us choose if we want to click before modifying parameters in the mixer.

KenD
New Member
Posts: 32
Joined: Sat Oct 12, 2019 10:52 pm
Contact:

Re: Scrolling in Mixer modifies values

Post by KenD »

Many thanks to hesca116 for all 7 of your super suggestions/solutions! Such a fantastic help even 4 years on!
Cubase 10.5|HALion Sonic SE| NI Komplete 12 |Groove Agent SE
WIN10|QuietPC Custom Built |i7-9700 32GB RAM : 2x 1TB SSD's
Focusrite Scarlett 18i20
NI Maschine Micro MK3
Alesis M1 active monitors
Phillips 43" 4K screen monitor

Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 4 guests