Wavelab 7 Extreme clipping in the red - Mac High Sierra

All topics on WaveLab 7 and WaveLab Elements 7
Post Reply
chosen
New Member
Posts: 4
Joined: Wed Oct 03, 2018 11:39 am
Contact:

Wavelab 7 Extreme clipping in the red - Mac High Sierra

Post by chosen » Wed Oct 03, 2018 11:48 am

Hi Everyone!

Hope you guys can shine some light?

Have connected the REC OUT from my dj mixer into Line Inputs 3 & 4 of my iConnectivity audio4+ USB audio interface...

My levels are instantly in the red after I click the Red record button and launch the recording window...

Have included a couple of snapshots below:

Hope someone can possibly diagnose the situation...

I know Wavelab 7 is not supported in Mac 10.13 but it used to work fine...

Thanks...
Attachments
Screen Shot 2018-09-26 at 9.47.43 pm.png
(86.34 KiB) Not downloaded yet
Screen Shot 2018-09-27 at 8.20.43 pm.png
(677.19 KiB) Not downloaded yet

bob99
Senior Member
Posts: 2506
Joined: Fri Jan 07, 2011 2:49 am
Contact:

Re: Wavelab 7 Extreme clipping in the red - Mac High Sierra

Post by bob99 » Sat Oct 06, 2018 9:55 pm

chosen wrote:
Wed Oct 03, 2018 11:48 am
I know Wavelab 7 is not supported in Mac 10.13 but it used to work fine...
Have you installed the latest eLicenser and Wavelab 7 updates?
https://www.steinberg.net/en/support/downloads.html

chosen
New Member
Posts: 4
Joined: Wed Oct 03, 2018 11:39 am
Contact:

Re: Wavelab 7 Extreme clipping in the red - Mac High Sierra

Post by chosen » Tue Oct 09, 2018 10:47 am

Hi Bob!

Thanks for replying!

Have updated both but still in the extreme red...

I think it might be something wrong with the inputs of my audio interface...

This also occurs in Ableton and Cubase...

Found this post from Amazon...
Screen Shot 2018-10-09 at 8.43.44 pm.png
(117.55 KiB) Not downloaded yet
Screen Shot 2018-10-09 at 8.30.47 pm.png
(679.85 KiB) Not downloaded yet
Not sure what I should do?

bob99
Senior Member
Posts: 2506
Joined: Fri Jan 07, 2011 2:49 am
Contact:

Re: Wavelab 7 Extreme clipping in the red - Mac High Sierra

Post by bob99 » Tue Oct 09, 2018 11:19 pm

chosen wrote:
Tue Oct 09, 2018 10:47 am
Hi Bob!

Thanks for replying!

Have updated both but still in the extreme red...

I think it might be something wrong with the inputs of my audio interface...

This also occurs in Ableton and Cubase...

Found this post from Amazon...

Screen Shot 2018-10-09 at 8.43.44 pm.png

Screen Shot 2018-10-09 at 8.30.47 pm.png

Not sure what I should do?
Maybe install the latest firmware or contact their support.

https://www.iconnectivity.com/downloads

Post Reply

Return to “WaveLab 7 | WaveLab Elements 7”

Who is online

Users browsing this forum: No registered users and 1 guest