Cubasis 2.1 iRig interface recording problem

Post questions and find answers on Cubasis 2 here.
Post Reply
Customtele
New Member
Posts: 1
Joined: Thu Apr 27, 2017 9:48 pm
Contact:

Cubasis 2.1 iRig interface recording problem

Post by Customtele » Thu Apr 27, 2017 9:51 pm

Hi, i purchased Cubasis 2.1 tonight and plugged in my iRig/Guitar, I'm running through Bias FX inter app audio into Cubasis 2.1.

I noticed when i listen back to what I've recorded i can hear the metronome still in the back of what I've recorded.

Do you think this is down to using a very cheap interface? It did only cost approx £10.

Or am i not doing something right?

Thanks
Ben

User avatar
LSlowak
Steinberg Employee
Posts: 3210
Joined: Thu Aug 08, 2013 12:36 pm
Contact:

Re: Cubasis 2.1 iRig interface recording problem

Post by LSlowak » Fri Apr 28, 2017 12:28 pm

Hi Ben,

Thanks for your message.

If an audio recording contains the metronome signal this could be related to cross talk caused by a loud headphone or similar. I suggest to search the web for tips how to avoid this problem.

Hope that helps!

Best,
Lars
Lars Slowak - Project Management & Team lead Cubasis
Steinberg Media Technologies GmbH
Hamburg, Germany
Check out Steinberg on YouTube, Twitter and Facebook

Nexsfi
New Member
Posts: 2
Joined: Fri Apr 20, 2018 10:22 pm
Contact:

Re: Cubasis 2.1 iRig interface recording problem

Post by Nexsfi » Fri Apr 20, 2018 10:44 pm

Hi guys,

i have bene experiecing the same problem. When I record guitars I hear the click in the actual track when it’s recorded.
I use Bias trough Audiobus to cubasis.

Please advise

Cheers

nex

User avatar
LSlowak
Steinberg Employee
Posts: 3210
Joined: Thu Aug 08, 2013 12:36 pm
Contact:

Re: Cubasis 2.1 iRig interface recording problem

Post by LSlowak » Mon Apr 23, 2018 10:38 am

Nexsfi wrote:
Fri Apr 20, 2018 10:44 pm
Hi guys,

i have bene experiecing the same problem. When I record guitars I hear the click in the actual track when it’s recorded.
I use Bias trough Audiobus to cubasis.

Please advise

Cheers

nex
Hi Nex,

So far we have not experienced similar issues, which seems unrelated to Cubasis.

I suggest to get in touch with the hardware manufacturer.
Also, it might make sense to browse the web how to avoid crosstalk issues, when recording audio.

Hope that helps!

Best,
Lars
Lars Slowak - Project Management & Team lead Cubasis
Steinberg Media Technologies GmbH
Hamburg, Germany
Check out Steinberg on YouTube, Twitter and Facebook

642carl
New Member
Posts: 41
Joined: Wed May 11, 2016 11:22 pm
Contact:

Re: Cubasis 2.1 iRig interface recording problem

Post by 642carl » Thu Apr 26, 2018 8:20 pm

If you're using the original iRig that plugs into the iPad headphone jack you're getting crosstalk.
There is NO way to avoid this, it's a limitation of using the headphone/mic jack.

Tons of USB audio interfaces are supported via the Apple(only use the authentic, not a knock-off) Camera Connection Kit.
Or get one of the newer iRigs like the HD or Pro that plug in via lightning connection, you'll get pristine sound quality.

Carl

User avatar
LSlowak
Steinberg Employee
Posts: 3210
Joined: Thu Aug 08, 2013 12:36 pm
Contact:

Re: Cubasis 2.1 iRig interface recording problem

Post by LSlowak » Fri Apr 27, 2018 9:34 am

642carl wrote:
Thu Apr 26, 2018 8:20 pm
If you're using the original iRig that plugs into the iPad headphone jack you're getting crosstalk.
There is NO way to avoid this, it's a limitation of using the headphone/mic jack.

Tons of USB audio interfaces are supported via the Apple(only use the authentic, not a knock-off) Camera Connection Kit.
Or get one of the newer iRigs like the HD or Pro that plug in via lightning connection, you'll get pristine sound quality.

Carl
Thanks again, Carl!

Best
Lars
Lars Slowak - Project Management & Team lead Cubasis
Steinberg Media Technologies GmbH
Hamburg, Germany
Check out Steinberg on YouTube, Twitter and Facebook

Post Reply

Return to “Cubasis | Cubasis 2”

Who is online

Users browsing this forum: No registered users and 4 guests