hang on exit

Use this forum for an overview of collected issues and to report new ones.
Post Reply
User avatar
HorNet505
Junior Member
Posts: 132
Joined: Sun Dec 26, 2010 9:48 pm
Contact:

hang on exit

Post by HorNet505 » Fri Dec 26, 2014 1:08 am

open C8 (v8.0.0)
close C8
all windows close, except the menu bar. I have to kick out the task and reset my ASIO device to get it closing.
I tried to deactivate ASIO guard and the Hub as suggested in other threads. But C8 won't close properly even one time :-(
No crash dumps either. It just freezes.

Winows 7 x64
32GB RAM
i7 Intel
MAudio ProjectMix
Cubase 10.x Pro
Windows 7 x64 (1x Master, 3x VEPro Slaves)
Fireface UCX + Mindprint TRIO SPDIF
KRK-Rokit 5 speakers in 5.1 setup
4 desktop screens

Cubase user from the beginning :-)

celticchef
New Member
Posts: 3
Joined: Sat Jan 03, 2015 2:02 am
Contact:

Re: hang on exit

Post by celticchef » Sat Jan 03, 2015 2:07 am

Same exact thing here. Very annoying.

makeshiftdan
New Member
Posts: 5
Joined: Fri Dec 12, 2014 7:37 am
Contact:

Re: hang on exit

Post by makeshiftdan » Sat Jan 03, 2015 3:09 am

same thing here

User avatar
Elektrobolt
Senior Member
Posts: 1334
Joined: Wed Jan 12, 2011 5:12 am
Location: A wet blue oblate spheroid spinning around a fiery bright yellow dwarf at 107,000 km/h.
Contact:

Re: hang on exit

Post by Elektrobolt » Sat Jan 03, 2015 5:47 am

Do you fellows have anything in common perhaps? Lots of devices in the MIDI Device Manager, the same audio interface, some common plugin or set of plugs, using Steinberg Hub, etc., to start the discussion.

If you have no interest in finding out for yourselves, I would suggest submitting a ticket with Steinberg Support. :)
"Remember that we live only in the present, in this fleeting instant; all the rest of our life is either past and gone, or not yet revealed."

User avatar
HorNet505
Junior Member
Posts: 132
Joined: Sun Dec 26, 2010 9:48 pm
Contact:

Re: hang on exit

Post by HorNet505 » Sat Jan 03, 2015 3:06 pm

Ok, for starters, I already disabled HUB and the ASIO GUARD. This did not solve the issue.
I use a MIDI Wrapper. Projects close ok, but Cubase itself will hang on exit. I use MAUDIO PROJECTMIX as hardware interface. Also there are some instances of jBridged 32bit plugins, which are not loaded very much into my projects.
I will test disabling my custom VST folder to check if there are troubles somewhere. I keep u updated.
How about you guys?
Cubase 10.x Pro
Windows 7 x64 (1x Master, 3x VEPro Slaves)
Fireface UCX + Mindprint TRIO SPDIF
KRK-Rokit 5 speakers in 5.1 setup
4 desktop screens

Cubase user from the beginning :-)

barryfell
Member
Posts: 276
Joined: Wed Dec 10, 2014 7:41 pm
Contact:

Re: hang on exit

Post by barryfell » Sat Jan 03, 2015 6:43 pm

It does this for me too on some projects. Not all though, so i'm guessing it's to do with a certain plugin or plugins. I haven't worked out which one yet.
Windows 10 / Cubase Pro 9.5 x64

User avatar
Elektrobolt
Senior Member
Posts: 1334
Joined: Wed Jan 12, 2011 5:12 am
Location: A wet blue oblate spheroid spinning around a fiery bright yellow dwarf at 107,000 km/h.
Contact:

Re: hang on exit

Post by Elektrobolt » Sun Jan 04, 2015 8:33 am

If you all just open Cubase and immediately (without any projects opening) click File then Quit, still hangs forever?
"Remember that we live only in the present, in this fleeting instant; all the rest of our life is either past and gone, or not yet revealed."

Tracker
Junior Member
Posts: 81
Joined: Wed Mar 05, 2014 6:20 pm
Contact:

Re: hang on exit

Post by Tracker » Sun Jan 04, 2015 5:57 pm

I went back to an Acronis backup of my OS with just Windows 7 and installed only Cubase Pro 8 to trouble shoot re-record bugs and had these problems above. I don't have it in my current work OS with all my plugs and 7.07, 7.5.3 installed with Pro 8 as well. I'm baffled. I would get it with just opening up a blank project and testing out one Cubase synth and then trying to close the project.
Cubase 10, Pro 9.5, Windows 10 64bit, RME HDSPe AIO, UAD-2
I7 6800k(4.3ghz), Asus X99-A, 64gb 3200 ddr4(4x16)
Radeon RX560 triple monitors (2x22" dvi, 1x55" 4k hdmi).

User avatar
Elektrobolt
Senior Member
Posts: 1334
Joined: Wed Jan 12, 2011 5:12 am
Location: A wet blue oblate spheroid spinning around a fiery bright yellow dwarf at 107,000 km/h.
Contact:

Re: hang on exit

Post by Elektrobolt » Mon Jan 05, 2015 6:46 am

How about nothing opened at all, meaning just Cubase, no project loaded? (Just startup and File/Quit.)
"Remember that we live only in the present, in this fleeting instant; all the rest of our life is either past and gone, or not yet revealed."

celticchef
New Member
Posts: 3
Joined: Sat Jan 03, 2015 2:02 am
Contact:

Re: hang on exit

Post by celticchef » Sat Jan 10, 2015 7:45 pm

I had some sucess in fixing this issue, might help someone here.

http://www.steinberg.net/forums/viewtop ... 22#p421122

User avatar
HorNet505
Junior Member
Posts: 132
Joined: Sun Dec 26, 2010 9:48 pm
Contact:

Re: hang on exit

Post by HorNet505 » Tue Jan 13, 2015 3:55 pm

celticchef wrote:I had some sucess in fixing this issue, might help someone here.

http://www.steinberg.net/forums/viewtop ... 22#p421122
This thread shows the same problems, however I could open and close C8 with no project without problems.
I will continue searching for plugin errors.
Cubase 10.x Pro
Windows 7 x64 (1x Master, 3x VEPro Slaves)
Fireface UCX + Mindprint TRIO SPDIF
KRK-Rokit 5 speakers in 5.1 setup
4 desktop screens

Cubase user from the beginning :-)

User avatar
HorNet505
Junior Member
Posts: 132
Joined: Sun Dec 26, 2010 9:48 pm
Contact:

Re: hang on exit

Post by HorNet505 » Thu Jan 15, 2015 1:11 am

guys, can you check if it helps to CLOSE the project before exiting Cubase.
It seems to work here so far.
Cubase 10.x Pro
Windows 7 x64 (1x Master, 3x VEPro Slaves)
Fireface UCX + Mindprint TRIO SPDIF
KRK-Rokit 5 speakers in 5.1 setup
4 desktop screens

Cubase user from the beginning :-)

Tracker
Junior Member
Posts: 81
Joined: Wed Mar 05, 2014 6:20 pm
Contact:

Re: hang on exit

Post by Tracker » Tue Jan 27, 2015 2:52 am

I had a discovery today. When I open a new project and get to the "set project folder" screen if I pick a hard drive there instead of making a new folder within that hard drive C8 will hang when I try to quit. Closing the project first doesn't make a difference. This is with either an empty project or not as well as saved or not saved.

But when I make a new folder or choose an existing one for a new project on any of my hard drives C8 closes no problem.
Cubase 10, Pro 9.5, Windows 10 64bit, RME HDSPe AIO, UAD-2
I7 6800k(4.3ghz), Asus X99-A, 64gb 3200 ddr4(4x16)
Radeon RX560 triple monitors (2x22" dvi, 1x55" 4k hdmi).

User avatar
HorNet505
Junior Member
Posts: 132
Joined: Sun Dec 26, 2010 9:48 pm
Contact:

Re: hang on exit

Post by HorNet505 » Wed Jan 28, 2015 10:04 pm

can't confirm that. I do create various folders or save to an existing one. Does not change it. But It now kind of happens rarely since I deactivated HUB, ASIO GUARD and close the project via the menu and not the red X in the right corner. Maybe Cubase hangs when not beeing able to close the project fast enough before the program quits too. In my workaround it seems, Cubase has enough time to breath after unloadeing the projects RAM.
Cubase 10.x Pro
Windows 7 x64 (1x Master, 3x VEPro Slaves)
Fireface UCX + Mindprint TRIO SPDIF
KRK-Rokit 5 speakers in 5.1 setup
4 desktop screens

Cubase user from the beginning :-)

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 2 guests