AI6 Download Code invalid or used

This section is about Steinberg's CMC controllers
Post Reply
benderooo
New Member
Posts: 1
Joined: Fri Dec 07, 2012 6:44 pm
Contact:

AI6 Download Code invalid or used

Post by benderooo » Fri Dec 07, 2012 6:57 pm

Greetings All,

I just got 4 CMC controllers, registered them and I'm trying to get Cubase AI 6 but no matter which Download Access Code I type in on MySteinberg page it tells me that code is invalid or was used before. Controllers where packed originally so they couldn't be used before.

I need this AI6 download as I ordered Cubase 7 upgrade and its on its way but it is going to be useless if I can't install CUbase AI 6 first!

Did try all 4 codes, both - upper and lower case - and nothing.

Did anyone had this issue?

coaster
New Member
Posts: 2
Joined: Thu Jan 31, 2013 7:50 am
Contact:

Re: AI6 Download Code invalid or used

Post by coaster » Thu Jan 31, 2013 7:53 am

I registered the cmc-ai as per directions clicked on the download Cubase link only to keep getting "invalid access code or used already." It's a brand new product
H E L P

Jaymo99
Junior Member
Posts: 91
Joined: Fri Mar 02, 2012 11:02 am
Contact:

Re: AI6 Download Code invalid or used

Post by Jaymo99 » Sat Feb 02, 2013 1:01 pm

I too been having the same problem, regitering my AI was no problem but my QC i get invalid Serial or already registered... bought new couple weeks ago...weird

any news?

any Idea?

Help?
My studio
AMD FX 8350 4.0Mhz 8 core on a Gigabyte 990FX Gaming w/ 32gb Ram / SSD main drive/Windows 10 64 bit/ Steinberg UR 242/CMC QC & AI/Cubase 9.5.20/ some synths some guitars some Basses and a Cat

User avatar
BriHar
Senior Member
Posts: 2144
Joined: Wed Dec 15, 2010 11:10 pm
Contact:

Re: AI6 Download Code invalid or used

Post by BriHar » Mon Feb 04, 2013 10:32 am

I had the same message come up when trying to register my CMC-QC unit although 4 other units registered without a hitch. I've notified support service which is what I suggest you do as well.

That being said, I think there is some confusion by the OP.
Registering your product has nothing to do with downloading Cubase AI.
You've successfully registered other CMC units, and with each unit comes a software Activation key for installation of Cubase AI.
Use one of those keys, it doesn't have to specifically be the key packaged with the CMC-AI - the "AI" designation of one has nothing to do with the "AI" designation of the other. ;)
"...yes I think it can be easily done, just take everything down to Highway 61."

Sun Point Studio Turbenthal, Switzerland


Cubase Pro 8.5.15 - 64bit | Cubase AI8 | WaveLab 9.0.10 - 64bit | PT10 | UR28M | UR44 | CMC-PD/4xFD/QC/AI/CH/TP | BCF2000 | Contour Shuttlexpress | Graphire Tablet | Cubendo Custom Keyboard | Lenovo E31 Workstation:Xeon E3-1225V2/3.2GHz; 14GB DDR3 SDRAM; 2x Intel-Flash520 SSD 180GB (C:/D:);1TB 7200rpm Sata3 (F:); DVD RW (E:); Ext. 3TB USB3 Freecom + WD 1TB; Nvidea GeForce GT 630 4GB DDR3 Video Ram AGP PCIE | Win 10 Pro 64 Bit

User avatar
BriHar
Senior Member
Posts: 2144
Joined: Wed Dec 15, 2010 11:10 pm
Contact:

Re: AI6 Download Code invalid or used

Post by BriHar » Mon Feb 11, 2013 10:31 am

BriHar wrote:I had the same message come up when trying to register my CMC-QC unit although 4 other units registered without a hitch. I've notified support service which is what I suggest you do as well.
Just an update, a couple of days later I recieved an E-Mail from Georg Bruns at Steinberg informing me they had registered the product for me so it now shows up in my list of registered products.
Thanks Georg.
"...yes I think it can be easily done, just take everything down to Highway 61."

Sun Point Studio Turbenthal, Switzerland


Cubase Pro 8.5.15 - 64bit | Cubase AI8 | WaveLab 9.0.10 - 64bit | PT10 | UR28M | UR44 | CMC-PD/4xFD/QC/AI/CH/TP | BCF2000 | Contour Shuttlexpress | Graphire Tablet | Cubendo Custom Keyboard | Lenovo E31 Workstation:Xeon E3-1225V2/3.2GHz; 14GB DDR3 SDRAM; 2x Intel-Flash520 SSD 180GB (C:/D:);1TB 7200rpm Sata3 (F:); DVD RW (E:); Ext. 3TB USB3 Freecom + WD 1TB; Nvidea GeForce GT 630 4GB DDR3 Video Ram AGP PCIE | Win 10 Pro 64 Bit

Craigdaly
New Member
Posts: 4
Joined: Mon Sep 02, 2013 7:28 pm
Contact:

Re: AI6 Download Code invalid or used

Post by Craigdaly » Mon Sep 02, 2013 7:38 pm

Just purchased CMC FD & TP but cant get AI-6 download to recognise the product codes. What's the trick

Craigdaly
New Member
Posts: 4
Joined: Mon Sep 02, 2013 7:28 pm
Contact:

Re: AI6 Download Code invalid or used

Post by Craigdaly » Mon Sep 02, 2013 8:21 pm

ps to the above. when I try to complete the download I'm told my eLicencer is not valid. However, everything is ok on the computer Cubase 5 and groove agent both working fine.

User avatar
Fabian
Junior Member
Posts: 56
Joined: Thu Aug 29, 2013 6:58 am
Contact:

Re: AI6 Download Code invalid or used

Post by Fabian » Mon Sep 02, 2013 8:59 pm

Hi.

Unfortunately I am not entirely sure if I understand your problem. Were you able to enter your Download Access Code in MySteinberg? It seems like you were able to download Cubase AI 6, right? What do you mean with completing the download? How did you enter the eLicenser?

Best wishes
Fabian
Web Development
Steinberg Media Technologies GmbH
Hamburg, Germany

Craigdaly
New Member
Posts: 4
Joined: Mon Sep 02, 2013 7:28 pm
Contact:

Re: AI6 Download Code invalid or used

Post by Craigdaly » Wed Sep 04, 2013 5:18 pm

Hi Fabian,

In MySteinberg both of the download codes (I have two CMCs) were not recognised and the system asked for my serial number (I guess this is the eLicense number). When I entered that I was given a 'not valid' message.

Regards

Craig.

User avatar
Fabian
Junior Member
Posts: 56
Joined: Thu Aug 29, 2013 6:58 am
Contact:

Re: AI6 Download Code invalid or used

Post by Fabian » Wed Sep 04, 2013 6:04 pm

Hi Craig

Ah okay. If MySteinberg asks you for the serialnumber you actually have to enter the serial-number of your CMC-device and not the eLicenser-ID. I don't have one at hand at the moment but I guess it is printed somewhere on the physical device. After you have entered the serial number of your CMC-device you will receive the download links and an activationcode.

Good to know that this leads to confusion. We will try to make it more comprehensible. Thanks.

If you're still having trouble, just let me know.

Regards
Fabian
Web Development
Steinberg Media Technologies GmbH
Hamburg, Germany

User avatar
rtorstrick
Member
Posts: 350
Joined: Wed Dec 15, 2010 9:18 pm
Location: Indiana
Contact:

Re: AI6 Download Code invalid or used

Post by rtorstrick » Wed Sep 04, 2013 10:09 pm

i just registered a CMC-PD I've had for a while. I thought I had registered it, but it wasn't listed in my account. I entered the access code for AI6 (which is what came with my CMC) and got an error message that it had been used with another hardware device. Since this is the card that came with my CMC, that I had NOT used, what gives, and what recourse do I have?
Windows 10
Cubase 10, Halion 6.1.15, Wavelab 9.5.35, Dorico 2.1
Intel Core i7, 16 Gb RAM, ASUS Z97-A mobo, 256 Gb SATA SSD system drive, 2x2TB SATA media drives,
G-Drive 3TB USB 3 drive.
Steinberg UR-RT 2, Steinberg MR816csx, Yamaha KX8, CC121, UAD-2 Duo (Pcie)

User avatar
Fabian
Junior Member
Posts: 56
Joined: Thu Aug 29, 2013 6:58 am
Contact:

Re: AI6 Download Code invalid or used

Post by Fabian » Wed Sep 04, 2013 10:15 pm

Please write me a PM With the Download Access Code and I will have a look in the database.

Best wishes
Fabian
Web Development
Steinberg Media Technologies GmbH
Hamburg, Germany

Craigdaly
New Member
Posts: 4
Joined: Mon Sep 02, 2013 7:28 pm
Contact:

Re: AI6 Download Code invalid or used

Post by Craigdaly » Wed Sep 04, 2013 10:45 pm

Thanks Fabian,

It's sorted but I think the problem was that for some reason I needed to re-register my eLicenser with Steinberg. Great, and a nice surprise that I actually got AI 7 and not AI 6 as I was expecting :-)

Cheers.

Craig.

User avatar
Fabian
Junior Member
Posts: 56
Joined: Thu Aug 29, 2013 6:58 am
Contact:

Re: AI6 Download Code invalid or used

Post by Fabian » Thu Sep 05, 2013 7:14 am

Great, thanks for the feedback. Have fun with your Cubase AI 7. :)
Web Development
Steinberg Media Technologies GmbH
Hamburg, Germany

hemiole
New Member
Posts: 8
Joined: Tue Apr 03, 2012 5:23 pm
Contact:

Re: AI6 Download Code invalid or used

Post by hemiole » Thu Sep 12, 2013 7:23 pm

Fabian wrote: Have fun with your Cubase AI 7. :)
Oh, is this updated for any CMC controller I will buy now?

User avatar
Fabian
Junior Member
Posts: 56
Joined: Thu Aug 29, 2013 6:58 am
Contact:

Re: AI6 Download Code invalid or used

Post by Fabian » Fri Sep 13, 2013 9:15 am

Yes, any CMC that you will register now with your Download Access Code will return Cuabse AI 7.
Web Development
Steinberg Media Technologies GmbH
Hamburg, Germany

delafange
New Member
Posts: 3
Joined: Sat Sep 21, 2013 6:24 pm
Contact:

Re: AI6 Download Code invalid or used

Post by delafange » Mon Sep 23, 2013 10:36 pm

For what it is worth :
I had the same problem (error code) when trying to download cubaseai 7.
After trying many things, it appeared that I had two MySteinberg accounts (each with a different email address), and I tried to download from the account which has no elicenser registered. Passing to the other account solved the problem. Now, I would like to merge those two accounts, to avoid future problems. Is this possible ?

Stephane.

User avatar
joalter
New Member
Posts: 17
Joined: Sat Jan 15, 2011 10:42 am
Contact:

Re: AI6 Download Code invalid or used

Post by joalter » Fri Oct 04, 2013 3:52 pm

I have got the same problem with my cmc-pd. I cannot register the controller nor download Cubase AI (which is dongle-less so perfect for my notebook). The site states that the # included in the box does not exist. I opened a ticket to my Steinberg.. Any help?
By the way mysteinberg site has problems with the latest version of IE, so I also tried to use chrome with no success.
cheers
w
P9x79 - i73820 - 64GB 1866 ram -RME fireface - Windows 10 pro - DoricoPro 3 - cubase 10 - halion 6 - vsl - and more...

miloshgrubach
New Member
Posts: 1
Joined: Thu May 19, 2016 7:56 pm
Contact:

Re: AI6 Download Code invalid or used

Post by miloshgrubach » Sun Mar 26, 2017 9:15 am

I bought an audio interface Steinberg UR II. But the paper on which there was a download code acess I inadvertently lost. Is there a possibility to come back again to that number. Thank you in advance

meal5
New Member
Posts: 1
Joined: Mon Apr 24, 2017 3:23 am
Contact:

Re: AI6 Download Code invalid or used

Post by meal5 » Mon Apr 24, 2017 3:38 am

It seems like you were able to download Cubase AI 6, right?

Post Reply

Return to “Steinberg CMC Series”

Who is online

Users browsing this forum: No registered users and 0 guests