Busing mix and groups to a single bus

For users of legacy Steinberg Nuendo software
Post Reply
Omega Arts
Junior Member
Posts: 56
Joined: Wed Dec 22, 2010 6:59 pm
Contact:

Busing mix and groups to a single bus

Post by Omega Arts »

How can I bus the majority of a mix to one stereo bus including inserts and sends to group channels?
Larry

Omega Arts
Junior Member
Posts: 56
Joined: Wed Dec 22, 2010 6:59 pm
Contact:

Re: Busing mix and groups to a single bus

Post by Omega Arts »

Omega Arts wrote:How can I bus the majority of a mix to one stereo bus including inserts and sends to group channels?
Larry
Maybe this is better.
I have a mix where I need to turn down most of the mix, but not all. All the groups, inserts and sends are right where I want them so is there a way to send all these tracks,groups,sends and inserts to one stereo bus before the Master?
Larry

User avatar
Chewy Papadopoulos
Member
Posts: 857
Joined: Wed Dec 15, 2010 7:37 pm
Location: Santa Monica, CA
Contact:

Re: Busing mix and groups to a single bus

Post by Chewy Papadopoulos »

If I'm reading you right... I sometimes make a "PreMix" group channel that gets everything before the stereo out, and is routed to it... sort of a last-stage buffer group. You could make one of them, then re-route directly to the stereo out whatever elements that need to be changed. Is that the sort of thing you're talking about?

That, of course, was before N5, and its much more versatile routing. But it's still quick and easy.

Chewy
N10x, C8, Cubasis, Halion, UAD-2s (Quad PCI, Satellite & SOLO/Laptop), Fireface 800, UR-22, MC Control, MacPro 12 core 3.46GHz, 64 Gigs RAM OS 10.14.4; MacBook Pro 4 core, 16 Gigs, OS 10.13.6

Omega Arts
Junior Member
Posts: 56
Joined: Wed Dec 22, 2010 6:59 pm
Contact:

Re: Busing mix and groups to a single bus

Post by Omega Arts »

I haven't posted for awhile and noticed it says I'm a new member but I've been using Nuendo since 1.5.
Everything must have been reset.

Chewy can you send group and effects channels to a another group bus. Never needed to do this but now I do.
I'll try this tomorrow when I go in.
Thanks,
Larry

User avatar
MattiasNYC
Grand Senior Member
Posts: 4447
Joined: Thu Dec 16, 2010 9:27 am
Contact:

Re: Busing mix and groups to a single bus

Post by MattiasNYC »

Omega Arts wrote:I haven't posted for awhile and noticed it says I'm a new member but I've been using Nuendo since 1.5.
Everything must have been reset.

Chewy can you send group and effects channels to a another group bus. Never needed to do this but now I do.
I'll try this tomorrow when I go in.
Thanks,
Larry
Yes you can.
Nuendo 10.3 / Lynx TWO-B / Windows 10 Pro 64-bit, 2004 build 19041.450 / Ryzen 1700 3.6GHz (oc) / 16GB Corsair Vengeance DDR4@3200MHz / Radeon VII / ASUS x370-A mobo ::::: RX Post Production Suite 4 / DaVinci Resolve

Omega Arts
Junior Member
Posts: 56
Joined: Wed Dec 22, 2010 6:59 pm
Contact:

Re: Busing mix and groups to a single bus

Post by Omega Arts »

Thanks guys all is well.
I'm guessing all my effects and buses will remain in tact.
I've been out with the flu and went in this morning and tried a premix bus.
Sounds fine to me.
Anything I should pay special attention to?
First time for everything, hum my ears still ring.
Larry

User avatar
MattiasNYC
Grand Senior Member
Posts: 4447
Joined: Thu Dec 16, 2010 9:27 am
Contact:

Re: Busing mix and groups to a single bus

Post by MattiasNYC »

Omega Arts wrote:Thanks guys all is well.
I'm guessing all my effects and buses will remain in tact.
I've been out with the flu and went in this morning and tried a premix bus.
Sounds fine to me.
Anything I should pay special attention to?
First time for everything, hum my ears still ring.
Larry
As far as I can see the only thing to worry about is the amount of channels used and panning, i.e. pay attention if you end up changing it.
Nuendo 10.3 / Lynx TWO-B / Windows 10 Pro 64-bit, 2004 build 19041.450 / Ryzen 1700 3.6GHz (oc) / 16GB Corsair Vengeance DDR4@3200MHz / Radeon VII / ASUS x370-A mobo ::::: RX Post Production Suite 4 / DaVinci Resolve

Post Reply

Return to “Older Nuendo versions”

Who is online

Users browsing this forum: No registered users and 1 guest