
POLL: Is C6 hanging on exit for you?
-
- New Member
- Posts: 6
- Joined: Fri Feb 18, 2011 6:27 am
- Contact:
Re: POLL: Is C6 hanging on exit for you?
@sprbeast I'm confident it will resolve your problem. I'm glad it helped someone else! 

-
- Member
- Posts: 441
- Joined: Thu Dec 16, 2010 6:52 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
WHOHOOOO!
I done what tabsel said to do,and unwrapped vst3 then rewrapped. not crashing now!
time to get back to makin music.
not that this was stoppin me,but i have tendency to let little things like this distract me!
I done what tabsel said to do,and unwrapped vst3 then rewrapped. not crashing now!
time to get back to makin music.
not that this was stoppin me,but i have tendency to let little things like this distract me!
PC, Windows 10,AMD Phenom II X6 1090T Processor,3.20GHz,8GB Ram. Focusrite Saffire Pro 24 Interface,Novation Nocturn 25.
-
- Junior Member
- Posts: 195
- Joined: Wed Jan 19, 2011 2:41 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
Two days ago I renewed my chipset drivers for my ASUS board and now Cubase closes properly.
Win 7 64 bit ++ Core i5 2500k ++ Cubase 6 ++ UAD-2 ++
Burger Bar.......this is my 12th century church where I come for holy substance.......
Burger Bar.......this is my 12th century church where I come for holy substance.......
-
- New Member
- Posts: 5
- Joined: Wed Jan 12, 2011 12:07 am
Re: POLL: Is C6 hanging on exit for you?
+1 here (but with C5.5.3).Norbury Brook wrote:Same problem here,it's a PIA in front of clients here as I have to force quit and reopen Cubase if I'm moving between songs that have BFD in them.brissyproducer wrote:My issue is as follows.
Cubase 6.5.164bit with instance of BFD2.3.0.38 64bit hanging on close of project or exit program when project open.
Test Procedures
Test 1 :
Open cubase
Create empty project
Insert Instrument Track with BFD2 as Instrument
Close Project
= Hang
Test 2 :
Open cubase
Create empty project
Insert Instrument Track with BFD2 as Instrument
Remove BFD2 from the instrument track ie. go over to the inspector and change it to no device in the instrument track
Close Project
= No Problem
Test 3 :
Open cubase
Create empty project
Insert Instrument Track with BFD2 as Instrument
Close Cubase with project still open
= Hang
Test 4 :
Open cubase
Create empty project
Insert Instrument Track with BFD2 as Instrument
Remove BFD2 from the instrument track ie. go over to the inspector and change it to no device in the instrument track
Close Cubase with project still open
= No Problem
Any ideas for me would be appreciated
Thanks
Greg
MC
It was working fine on my old installation with Vista 32bit, Cubase 32bit and BFD2 32bit... (almost same hardware, I only replaced the harddisk with Vista by a SSD when switching to Win7, but I did a re-install "from scratch").
After changing to Win7 64bit, C5.5.3 64bit, BFD2 2.3.1.5 64bit, the problems started...
Already conatacted Fxpansion support and received a beta version which did not solve the problem.
ASUS P6T Deluxe, Core i7 920 2.66 GHz, 6GB DDR3 RAM PC1333, ASUS EN GT440, Intel SSD 240GB, 2 * 750GB HD, Win7 Prof. 64bit, Cubase 5.5.3 64bit, BFD2 64bit
-
- Junior Member
- Posts: 52
- Joined: Thu Oct 11, 2012 3:18 am
- Contact:
Re: POLL: Is C6 hanging on exit for you?
THis is my last chance to avoid selling or giving back my brand new Cubase 6.5.4
first i was afraid of the 64 bit issues between 32 and 6bits4 plug ins. But using C6 without any Vst already caused video problems, made me wait 3 or 5 minutes for each task.
Steinberg asks for minimun requirement, but i think they should ask for maximun requieremet.
i can figure that my i7 with .7200rpm. 6RAM is not enough for the system to work as it should/
Ive installed 4 times and cant get things go better.
Very upset.
Thanks for answering.
Juan Sabato
first i was afraid of the 64 bit issues between 32 and 6bits4 plug ins. But using C6 without any Vst already caused video problems, made me wait 3 or 5 minutes for each task.
Steinberg asks for minimun requirement, but i think they should ask for maximun requieremet.
i can figure that my i7 with .7200rpm. 6RAM is not enough for the system to work as it should/
Ive installed 4 times and cant get things go better.
Very upset.
Thanks for answering.
Juan Sabato
Vaio i7 Q740 @1.73GHz 7200 Rpm / //Win 7 64bit home premium// /6gb RAM// /Saffire Le firewire via pciexpress card// / C6.5.4
-
- Member
- Posts: 441
- Joined: Thu Dec 16, 2010 6:52 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
do u use automap?
PC, Windows 10,AMD Phenom II X6 1090T Processor,3.20GHz,8GB Ram. Focusrite Saffire Pro 24 Interface,Novation Nocturn 25.
-
- New Member
- Posts: 3
- Joined: Sat Aug 20, 2011 10:14 am
- Contact:
Re: POLL: Is C6 hanging on exit for you?
Thanks TabSel for suggestion!!TabSel wrote:automap -> software setup
left bottom you see the plugin types: VST2, VST3, RTAS etc...
clicking on a type reveals a list of plugins of that type.
mark all (<ctrl>-A) and uncheck any checked plugin -> unwraps all wrapped plugins
mark all and check any unchecked plugin -> wraps all unwrapped plugins
wrapping means that automap creates a new plugin, which basically is a copy of a so called "automap client" file, which might get updated on new automap releases. So, with a new automap release, sometimes these clients get updated, too, which makes it necessary to "rewrap" the plugins, which is usually stated within the release notes.
Yes - I did basically the similar, and it solved the issue for me (after more than a year hanging on exit):
In windows file explorer I searched all my VST folders for .dll an .vst3 files with the text "(Automap)" in their name and deleted them.
Then opened Automap and did regular Setup with Cubase 6. Note! - You must go through the whole Automap Sw Setup process - ie. Start and Restart Cubase while still in Automap Setup Process - as per instructions. Do not close the proces earlier.
Cubase 6.0.7 is closing fine now without any hangs!
Go ahead!
- Telogic
- Junior Member
- Posts: 140
- Joined: Wed Dec 15, 2010 8:19 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
I also want to confirm that cubase 6.5.4 hangs on exit every time ,i also was with another producer the other day working at his studio and cubase was hanging and sometimes crashing after loading and unloading pluggins.
This is on osx 10.8.2.
This is on osx 10.8.2.
Cubase 8.0.10 mac pro 6 core 3.3ghz 16gb ram,MR816x ,cc121, Novation impulse, access virus, krk vxt speakers, UAD2 cards, Wavelab 8.05 many many plugin's and some old outboard and synths.
Telogic aka Logicaldream
Telogic aka Logicaldream
-
- Member
- Posts: 441
- Joined: Thu Dec 16, 2010 6:52 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
are u running automap?
PC, Windows 10,AMD Phenom II X6 1090T Processor,3.20GHz,8GB Ram. Focusrite Saffire Pro 24 Interface,Novation Nocturn 25.
- Telogic
- Junior Member
- Posts: 140
- Joined: Wed Dec 15, 2010 8:19 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
I am running automap 4.5funkman wrote:are u running automap?
Cubase 8.0.10 mac pro 6 core 3.3ghz 16gb ram,MR816x ,cc121, Novation impulse, access virus, krk vxt speakers, UAD2 cards, Wavelab 8.05 many many plugin's and some old outboard and synths.
Telogic aka Logicaldream
Telogic aka Logicaldream
- Marcus
- Steinberg Employee
- Posts: 708
- Joined: Thu Feb 03, 2011 12:09 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
Here is the link to a knowledge base article related to the endless Novation issue:
https://www.steinberg.net/en/support/kn ... ation.html
Cheers,
Marcus
https://www.steinberg.net/en/support/kn ... ation.html
Cheers,
Marcus
- haraldsson
- Member
- Posts: 244
- Joined: Thu Dec 16, 2010 9:24 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
I am still having hanging on exit. I have no Automap installed. I have had Cubase 6.5.4. (Mac) open without any project open and after some time when I quit it still hangs... Nothing open but the pure Cubase 6.5.4. (Mac). So in my case this is definitely not related to Automap.
For me, this hanging on exit is only Mac related. I Don't have this problem on Windows 7.
For me, this hanging on exit is only Mac related. I Don't have this problem on Windows 7.
Best regards,
Hjörtur Haraldsson Blöndal
Hardware:
Apple - iMac 27" 4.2 GHz Intel Core i7 - 16GB Ram - macOS 10.15.1 Catalina
Steinberg UR22C Audio Interface
Host:
Steinberg - Cubase Pro 10.5.0
Hjörtur Haraldsson Blöndal
Hardware:
Apple - iMac 27" 4.2 GHz Intel Core i7 - 16GB Ram - macOS 10.15.1 Catalina
Steinberg UR22C Audio Interface
Host:
Steinberg - Cubase Pro 10.5.0
- Antonio Escobar
- Member
- Posts: 566
- Joined: Fri Dec 17, 2010 4:18 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
Same here on Mac and with Nuendo too.
Antonio Escobar
Site: http://www.antonioescobar.es
IMDB: http://www.antonioescobar.es/imdb
---
Nuendo 10.x / Cubase 10.x
Hackintosh i9 10 cores, 64 GB RAM
MacBook Pro 2017 16GB RAM, OS X10.13.6
RME Digiface Dante, RME HDSPe RayDAT, Steinberg UR824, Steinberg UR242, DAD AX32, 2x Behringer X32 (MADI and Dante)
Native Komplete Kontrol/Maschine, Waves, Softube, etc, etc, etc.
Dozens of analog synths and external hardware.
Site: http://www.antonioescobar.es
IMDB: http://www.antonioescobar.es/imdb
---
Nuendo 10.x / Cubase 10.x
Hackintosh i9 10 cores, 64 GB RAM
MacBook Pro 2017 16GB RAM, OS X10.13.6
RME Digiface Dante, RME HDSPe RayDAT, Steinberg UR824, Steinberg UR242, DAD AX32, 2x Behringer X32 (MADI and Dante)
Native Komplete Kontrol/Maschine, Waves, Softube, etc, etc, etc.
Dozens of analog synths and external hardware.
- Antonio Escobar
- Member
- Posts: 566
- Joined: Fri Dec 17, 2010 4:18 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
No reboot need, btw, just reopen again.
Antonio Escobar
Site: http://www.antonioescobar.es
IMDB: http://www.antonioescobar.es/imdb
---
Nuendo 10.x / Cubase 10.x
Hackintosh i9 10 cores, 64 GB RAM
MacBook Pro 2017 16GB RAM, OS X10.13.6
RME Digiface Dante, RME HDSPe RayDAT, Steinberg UR824, Steinberg UR242, DAD AX32, 2x Behringer X32 (MADI and Dante)
Native Komplete Kontrol/Maschine, Waves, Softube, etc, etc, etc.
Dozens of analog synths and external hardware.
Site: http://www.antonioescobar.es
IMDB: http://www.antonioescobar.es/imdb
---
Nuendo 10.x / Cubase 10.x
Hackintosh i9 10 cores, 64 GB RAM
MacBook Pro 2017 16GB RAM, OS X10.13.6
RME Digiface Dante, RME HDSPe RayDAT, Steinberg UR824, Steinberg UR242, DAD AX32, 2x Behringer X32 (MADI and Dante)
Native Komplete Kontrol/Maschine, Waves, Softube, etc, etc, etc.
Dozens of analog synths and external hardware.
- Marcus
- Steinberg Employee
- Posts: 708
- Joined: Thu Feb 03, 2011 12:09 pm
- Contact:
Re: POLL: Is C6 hanging on exit for you?
Hi guys,
feel free to contact the Steinberg support in order to get further information.
Cheers,
Marcus
feel free to contact the Steinberg support in order to get further information.
Cheers,
Marcus
Who is online
Users browsing this forum: No registered users and 13 guests