Page 1 of 1

BUG: Sometimes, randomly, Shift+Selecting pads does not select what would be expected and normal

Posted: Thu Apr 25, 2019 1:35 am
by WastingYourTime
Everyonce and a while, it seems as if Groove Agent loses track of what order the pads are in. For instance, I will go to shift+select a number of pads in order - left to right-bottom-up but it will select backwards.

Not sure what the steps to reproduce are.. But at the moment, I am making my own GA Libraries and I'm moving stuff around a lot. Copying pads from one kit to another. Cutting pads and pasting them both within agents/kits and from outside from other agents/kits.

Re: BUG: Sometimes, randomly, Shift+Selecting pads does not select what would be expected and normal

Posted: Thu Apr 25, 2019 9:35 am
by WastingYourTime
Issue always seems to be only with Group 8.

Re: BUG: Sometimes, randomly, Shift+Selecting pads does not select what would be expected and normal

Posted: Thu Apr 25, 2019 11:53 pm
by WastingYourTime
Confirmed, this is an issue with Group 8. Shift+selecting multiple pads does not function as it should and erroneously selects pads in the prior groups.

Re: BUG: Sometimes, randomly, Shift+Selecting pads does not select what would be expected and normal

Posted: Fri Apr 26, 2019 1:50 pm
by WastingYourTime
I figured out that because the last 4 top pads on Group 8 are lower midi note values (because they couldn't go any higher) and so I guess pad selection is based off MIDI note... and not Pad #? so it ends up selecting backwards. :o