CI 1 USB NO SOUND

This section is about Steinberg's USB audio interfaces CI1, CI2 and CI2+
Post Reply
ljst
New Member
Posts: 3
Joined: Tue Aug 14, 2012 7:08 pm
Contact:

CI 1 USB NO SOUND

Post by ljst » Tue Aug 14, 2012 7:14 pm

Newbie need help
CI 1 USB

I have my mic. plugged in to the CI 1 and usb plugged in to the computer , can't get any sound out of my computer speakers. Phantom power light is on , when i speak into mic. i can see the Input Gain Peak light comes on . I installed the software that came with it Sequel Le and Wavelab and the driver from the tools for CI 1 DISK

ANY HELP WOULD BE APPRECIATED

THANKS

Stefan Schreiber
Moderator
Posts: 190
Joined: Tue Dec 14, 2010 10:49 am
Contact:

Re: CI 1 USB NO SOUND

Post by Stefan Schreiber » Wed Aug 15, 2012 9:53 am

Hi Ijst,

If I understand you right you have not connected any speakers/headphones to the line outputs/headphone output of the CI1.
If you want to use the CI1 as the audio interface for your software application or for your computer you need to connect speakers to the CI1 an do the correct settings in the application and/or on your computer.
If you don't want to use the outputs of the CI1 but just the inputs you need to do the right settings in your application as well. Select CI1 as the input source and your computer's soundcard as the output source if you have connected speakers directly to the computer.

Best regards,
Stefan
Stefan Schreiber - Senior Marketing Manager Hardware
Steinberg Media Technologies GmbH
Hamburg, Germany

Connect with Steinberg on Facebook, YouTube, Twitter, Instagram, SoundCloud

ljst
New Member
Posts: 3
Joined: Tue Aug 14, 2012 7:08 pm
Contact:

Re: CI 1 USB NO SOUND

Post by ljst » Wed Aug 15, 2012 8:22 pm

Thats right i havn't connected anything to the outputs of the CI 1. Sorry i'm not very good with these computers its for my daughter...how do i select CI 1 as the input source and my soundcard as the output source on my computer?
I have windows 7 on my computer.

Thanks for your help

User avatar
Bane
Senior Member
Posts: 1728
Joined: Sun Jul 10, 2011 2:57 am
Contact:

Re: CI 1 USB NO SOUND

Post by Bane » Fri Aug 31, 2012 11:28 pm

Please see the first link in my signature.
Asus R500A-RS52, Windows 8, 2.6gHz i5 -3230M, 6GB RAM,

Cubase Artist 7.0.6, Wavelab Elements 7, Focusrite Scarlett 8i6, The Grand 3, Melodyne Essential, Superior Drummer, EZDrummer and Pop! EZX, Samson CO1, Yamaha P-35, Mackie MR5mk2 monitors, and more....

My tunes on: Soundcloud

Post Reply

Return to “Steinberg CI Series”

Who is online

Users browsing this forum: No registered users and 1 guest