CC121 & Euphonix MC Mix on same system?

All about Steinberg's Advanced Integration Controller CC121.
Post Reply
whitecat
New Member
Posts: 17
Joined: Thu Dec 16, 2010 12:51 am
Contact:

CC121 & Euphonix MC Mix on same system?

Post by whitecat »

Just wondering if anyone is using these together on the same system at the same time (I use Nuendo here but I imagine the Cubase experience must be similar) - do they play nicely together?
http://www.whitecat.tv

Nuendo 5.5 + NEK / MR816X / CC121 / Mac (10.7.2)

Tonfriedemann
New Member
Posts: 21
Joined: Tue Jan 11, 2011 1:23 pm
Contact:

Re: CC121 & Euphonix MC Mix on same system?

Post by Tonfriedemann »

I do not have this configuration myself, nevertheless I had quite some time to try out exactly this combination and it worked smoothly with no confusions or problems.

Best regards

Friedemann
N10, W10.0.40

whitecat
New Member
Posts: 17
Joined: Thu Dec 16, 2010 12:51 am
Contact:

Re: CC121 & Euphonix MC Mix on same system?

Post by whitecat »

Tonfriedemann wrote:I do not have this configuration myself, nevertheless I had quite some time to try out exactly this combination and it worked smoothly with no confusions or problems.

Best regards

Friedemann
Excellent... can you elaborate at all on what you tried? Does the CC121 mirror an MC fader or can it be 'locked' somehow to a master channel, for example? Obviously the EQ section is the EQ section and that has no parallel on the MC Mix but I'm wondering if any of the other buttons might "conflict" ...

Thanks!!
Last edited by whitecat on Fri Jan 28, 2011 4:02 pm, edited 1 time in total.
http://www.whitecat.tv

Nuendo 5.5 + NEK / MR816X / CC121 / Mac (10.7.2)

Norbury Brook
Member
Posts: 873
Joined: Thu Jan 20, 2011 11:40 am
Contact:

Re: CC121 & Euphonix MC Mix on same system?

Post by Norbury Brook »

I'm using both here no problems.The rotaries on the MC Mix are nicer feeling for eq than the CC121 although not as instantly under you fingers.


Marcus
ASRock x570 Taichi -Ryzen 3950x-16 core -32 gigs 3600 DDR4- AMD 580- Windows 10 x64-OSX Mojave- AXR4-Euphonix mix,Transport-CC121-Cubase 10.5.x

Tonfriedemann
New Member
Posts: 21
Joined: Tue Jan 11, 2011 1:23 pm
Contact:

Re: CC121 & Euphonix MC Mix on same system?

Post by Tonfriedemann »

whitecat wrote:
Tonfriedemann wrote:I do not have this configuration myself, nevertheless I had quite some time to try out exactly this combination and it worked smoothly with no confusions or problems.

Best regards

Friedemann
Excellent... can you elaborate at all on what you tried? Does the CC121 mirror an MC fader or can it be 'locked' somehow to a master channel, for example? Obviously the EQ section is the EQ section and that has no parallel on the MC Mix but I'm wondering if any of the other buttons might "conflict" ...

Thanks!!
Sorry for the delay. The CC121 follows the selected channel. The MC can do this but doesn´t have to do this necessarily. Never the less, if you use the follow selected channel mode both units will follow the selection and somehow copy their functions. They do not interfere, but follow each other. No problems ever. Only thing: don´t try to write automation on both faders simultaneously ;)

best regards

Friedemann
N10, W10.0.40

Post Reply

Return to “Steinberg CC121”

Who is online

Users browsing this forum: No registered users and 1 guest