Page 1 of 1

Newbie needs to boost bass

Posted: Sun Nov 10, 2019 11:02 pm
by DrChet
Sorry for my second noob question but I can't seem to find stuff I need in the documentation (yeah, I RTFM). :oops: I have a great test project for WaveLab Pro 10 that has a nice bass part that was mixed way too low. I can see it in the spectrum 3-D analysis and hear it as well, but it is barely audible. Is there a simple way to boost frequencies from, say, 40-155 Hz?

It's also light from 3 kHz up but I assume a similar solution would work for that as well.

Thanks in advance for any help. :)

Re: Newbie needs to boost bass

Posted: Sun Nov 10, 2019 11:31 pm
by markino
Hello, you can choose StudioEq from Master Section, try these settings

Re: Newbie needs to boost bass

Posted: Mon Nov 11, 2019 4:23 pm
by DrChet
Thank you! Your post did the trick. I've been playing with the different frequencies but your suggestion was a great starting point. I'm also getting a good feel for what can and cannot be salvaged in mastering. The guitar is too loud and intrudes on the bass so much it's hard to boost the bass without getting way too much guitar. :shock:

Thanks again for your help. I really appreciate it. :D

Re: Newbie needs to boost bass

Posted: Mon Nov 11, 2019 9:33 pm
by markino
You are welcome DrChet ;)