SOLO MODES

Post general topics related to Nuendo 10 here.
Post Reply
GTBannah
Member
Posts: 615
Joined: Mon Feb 20, 2012 9:24 pm
Contact:

SOLO MODES

Post by GTBannah » Thu Nov 21, 2019 3:08 pm

Hello!

Do I have to remember to hold down "Cmd" EVERY time I want the second soloed track to un-solo the previously soloed track?

Isn't there a global preference, or a menu item, to set the kind of behaviour I want?

Thanx!
Derrkins

If that's really what you hear, Play It, Sing It, Write It or Program It!

Mac Mini, 2.6 GHz Intel Core i7, 16 GB RAM; OS X Mojave 10.14.6; Nuendo 8.3.20.345; Sibelius 7.5; iPad Pro 13"; Cubasis, WaveLab 9.00; Dorico V3.0.0.1038 (Loving it).

User avatar
MattiasNYC
Grand Senior Member
Posts: 3890
Joined: Thu Dec 16, 2010 9:27 am
Contact:

Re: SOLO MODES

Post by MattiasNYC » Thu Nov 21, 2019 6:16 pm

Not sure I understand.. You want solo buttons to not latch, is that correct? That's how it is on my end so it has to be a preference somewhere.
Nuendo 7.1.4 / Lynx TWO-B / Windows 10 Pro 64-bit / Ryzen 1700 3.7GHz (oc) / 16GB Corsair Vengeance DDR4@3200MHz / Nvidia GTX 660 / ASUS x370-A mobo/ 500GB WD Blue system drive / Crucial BX100 250GB SSD media / spinners for library/backup ::::: iZotope RX / Phoenixverb Surround / DaVinci Resolve / Faderport / Applied Acoustics UltraAnalog / my pet pony Frank

User avatar
Dietz
Member
Posts: 315
Joined: Sat Dec 18, 2010 5:40 pm
Location: Vienna / Europe
Contact:

Re: SOLO MODES

Post by Dietz » Thu Nov 21, 2019 7:59 pm

@GTBannah:

Personally I really like NU's option to have the Solo following the track selection. This fits my needs much better than the typical "Solo cancels previous solo"-feature of other DAWs like ProTools: You can have channels switching to "exclusive solo" by means of the cursor keys*) or direct track selection, but you can also have latching solo by using the actual Solo butto - all at the same time.

*) ... this is especially nice for the gap-less comparison of tracks, a.k.a "ref-check" :-)
/Dietz

| audio | engineering | music | production |
| soundware | development |

| Nuendo versions from 5.5.6 to 10.2.10 | on various systems and platforms |
| Steinberg user since the 80ies | Nuendo user and forum member since 2000 |

GTBannah
Member
Posts: 615
Joined: Mon Feb 20, 2012 9:24 pm
Contact:

Re: SOLO MODES

Post by GTBannah » Fri Nov 22, 2019 8:02 am

MattiasNYC wrote:
Thu Nov 21, 2019 6:16 pm
Not sure I understand.. You want solo buttons to not latch, is that correct? That's how it is on my end so it has to be a preference somewhere.
Yes, Mattias; you do. I, too, believe it's a preference "somewhere". The question is, "Where?"
Derrkins

If that's really what you hear, Play It, Sing It, Write It or Program It!

Mac Mini, 2.6 GHz Intel Core i7, 16 GB RAM; OS X Mojave 10.14.6; Nuendo 8.3.20.345; Sibelius 7.5; iPad Pro 13"; Cubasis, WaveLab 9.00; Dorico V3.0.0.1038 (Loving it).

GTBannah
Member
Posts: 615
Joined: Mon Feb 20, 2012 9:24 pm
Contact:

Re: SOLO MODES

Post by GTBannah » Fri Nov 22, 2019 8:04 am

Dietz wrote:
Thu Nov 21, 2019 7:59 pm
@GTBannah:

Personally I really like NU's option to have the Solo following the track selection. This fits my needs much better than the typical "Solo cancels previous solo"-feature of other DAWs like ProTools: ....
*) ... this is especially nice for the gap-less comparison of tracks, a.k.a "ref-check" :-)
Aren't they the same thing?

That's what I want.

Where do I find the switch, to turn it on?
Derrkins

If that's really what you hear, Play It, Sing It, Write It or Program It!

Mac Mini, 2.6 GHz Intel Core i7, 16 GB RAM; OS X Mojave 10.14.6; Nuendo 8.3.20.345; Sibelius 7.5; iPad Pro 13"; Cubasis, WaveLab 9.00; Dorico V3.0.0.1038 (Loving it).

Niekbeem
Member
Posts: 595
Joined: Tue Aug 16, 2011 9:19 am
Location: Amsterdam
Contact:

Re: SOLO MODES

Post by Niekbeem » Fri Nov 22, 2019 8:12 am

Where do I find the switch, to turn it on?
I, too, believe it's a preference "somewhere". The question is, "Where?"

Is this what you're looking for?

Nuendo prefs:
Editing / Project & Mix Console / Enable Solo on Selected Track

?

Workflow:
Solo any channel, from now on Solo follows when you select another track.

Niek/ Amsterdam
Nuendo 10 / Pro Tools Ultimate / Logic X / MixBus32C 5 / WaveLab 9.5
MacPro 5.1: 12Core 3.46GHz Intel Xeon/ 48GB RAM/ Mac OSX 10.13
MacBook Pro: 2.9 GHz Intel Core i9/ 32 GB RAM/ Mac OSX 10.14
MetricHalo ULN8 + 2882 / RME HDSPe MadiFace
Euphonix MC Pro

GTBannah
Member
Posts: 615
Joined: Mon Feb 20, 2012 9:24 pm
Contact:

Re: SOLO MODES

Post by GTBannah » Fri Nov 22, 2019 8:20 am

Niekbeem wrote:
Fri Nov 22, 2019 8:12 am
Where do I find the switch, to turn it on?
I, too, believe it's a preference "somewhere". The question is, "Where?"

Is this what you're looking for?

Nuendo prefs:
Editing / Project & Mix Console / Enable Solo on Selected Track

?

Workflow:
Solo any channel, from now on Solo follows when you select another track.

Niek/ Amsterdam
Aaahhh! Yes. (Scratches chin)

I was clicking the "solo" button on the track, instead of "selecting" the track. That might be my Pro Tools background kicking in. Hmmm

Thanx!
Derrkins

If that's really what you hear, Play It, Sing It, Write It or Program It!

Mac Mini, 2.6 GHz Intel Core i7, 16 GB RAM; OS X Mojave 10.14.6; Nuendo 8.3.20.345; Sibelius 7.5; iPad Pro 13"; Cubasis, WaveLab 9.00; Dorico V3.0.0.1038 (Loving it).

User avatar
MattiasNYC
Grand Senior Member
Posts: 3890
Joined: Thu Dec 16, 2010 9:27 am
Contact:

Re: SOLO MODES

Post by MattiasNYC » Fri Nov 22, 2019 4:24 pm

You know, I think I got so used to having solo follow selected track that I forgot that solo latches by default.

We should maybe make it a feature request to have X-or and Latch both as a preference. I almost never need latch by default, so it makes more sense for me to have X-or as default and have the modifier key temporarily latch rather than the opposite...
Nuendo 7.1.4 / Lynx TWO-B / Windows 10 Pro 64-bit / Ryzen 1700 3.7GHz (oc) / 16GB Corsair Vengeance DDR4@3200MHz / Nvidia GTX 660 / ASUS x370-A mobo/ 500GB WD Blue system drive / Crucial BX100 250GB SSD media / spinners for library/backup ::::: iZotope RX / Phoenixverb Surround / DaVinci Resolve / Faderport / Applied Acoustics UltraAnalog / my pet pony Frank

GTBannah
Member
Posts: 615
Joined: Mon Feb 20, 2012 9:24 pm
Contact:

Re: SOLO MODES

Post by GTBannah » Mon Nov 25, 2019 5:06 am

MattiasNYC wrote:
Fri Nov 22, 2019 4:24 pm
You know, I think I got so used to having solo follow selected track that I forgot that solo latches by default.

We should maybe make it a feature request to have X-or and Latch both as a preference. I almost never need latch by default, so it makes more sense for me to have X-or as default and have the modifier key temporarily latch rather than the opposite...
+1, for an alternative to the current approach.
Derrkins

If that's really what you hear, Play It, Sing It, Write It or Program It!

Mac Mini, 2.6 GHz Intel Core i7, 16 GB RAM; OS X Mojave 10.14.6; Nuendo 8.3.20.345; Sibelius 7.5; iPad Pro 13"; Cubasis, WaveLab 9.00; Dorico V3.0.0.1038 (Loving it).

Getalife2
Member
Posts: 593
Joined: Sat May 24, 2014 3:32 pm
Contact:

Re: SOLO MODES

Post by Getalife2 » Mon Nov 25, 2019 4:13 pm

I have "Solo follows track selection" on a key command. I turn it on and off all the time depending upon what I'm doing. I find it very effective to hear what I want to hear when I want to hear it.
N10.0.20 - i7 5960X/32 GB at 4.3GHz with x7 SSDs - Win 7/64 - 2x RME MADI - 3X UAD-2 Quad - VEP

Post Reply

Return to “General”

Who is online

Users browsing this forum: chi_mike, Graveley and 1 guest