Page 1 of 1

Touch OSC control for Cubase 10.5 Pro

Posted: Fri Feb 14, 2020 12:50 am
by Vicken
Hi Everyone,

I have been playing with this one for a long time until I figured out exactly how to program it and use it. I was able to make a channel strip to control the selected channel plus a drum pad. I will include the files for everyone who likes to try, one file is for the editing software from Hexler.net to load into the iPad and the other is to import into Cubase as a generic remote. The design is inspired by mattsynth (on YT).

Word of caution is that I used CC's on channels 1 and 2 and if you are using another controller that use the same CC's it might interfere, not sure, but you can always change the channel to one that is not used by your keyboards or controllers. Just make sure that TouchOSC is set as midi in and out on the generic remote.

I hope it works well.

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Fri Feb 14, 2020 1:27 am
by Vicken
Some screenshots.

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Fri Feb 14, 2020 3:18 pm
by dr
thanks for sharing

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Fri Feb 14, 2020 6:56 pm
by Jari Junttila
Do these work on Android? I don´t have ipad, but android tab and touchosc is also available on android

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Fri Feb 14, 2020 8:19 pm
by dr
Jari Junttila wrote:
Fri Feb 14, 2020 6:56 pm
Do these work on Android? I don´t have ipad, but android tab and touchosc is also available on android
I don't know for sure (I'm on ipad) but I believe the config files are cross platform - give it a try

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Fri Feb 14, 2020 10:48 pm
by Vicken
The website says it is compatible with android
https://hexler.net/products/touchosc

By the way I discovered that the "Down" arrow is not behaving right, on my system the hilighted track is moving down but the song cursor reset to the very start! will look into it.
I am also working to add another page to add EQ, Comp, Gate controls.

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Fri Feb 14, 2020 10:51 pm
by dr
thanks Vicken - it would be great if you post here when done

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Sat Feb 15, 2020 8:01 am
by ggmanestraki
Vicken wrote:
Fri Feb 14, 2020 10:48 pm

By the way I discovered that the "Down" arrow is not behaving right, on my system the hilighted track is moving down but the song cursor reset to the very start! will look into it.
Is your right locator perhaps at the very start also? (Because right locator is Num2) ;)

I too am trying to set up a remote using Touch Portal, and I'm stuck on arrow keys (navigation keycommands) not working as I expected. I changed them to other keys, but then I'm having other issues.

Great stuff those mobile remotes though!

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Sat Feb 15, 2020 10:04 am
by Vicken
Latest files, added another page with Eq and compressor control, Pre: is not done yet, I am interested to hear some input, everywhere I looked there was barely any help to program this but I was able to incorporate a meter at least.

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Sat Feb 15, 2020 10:43 am
by djgraver
Thnak you!

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Mon Feb 17, 2020 9:03 am
by misjavw
I've been using TouchOSC for a long time with Nuendo. I have a setup with multiple pages, including commands, channel, EQ, Surroundpanner, transport, and control room. If anybody is interested I am happy to share the project and Generic Remote setup.

Some screenshots

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Mon Feb 17, 2020 9:04 am
by misjavw
More screenshots

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Mon Feb 17, 2020 12:23 pm
by dr
^^^^^

it would be great if you could - I like the look of the surround panner :)

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Tue Feb 18, 2020 8:56 am
by misjavw
Here are the TouchOSC project and Generic Remote setup for Nuendo, which should work for Cubase as well. Note that the you need to assign the "Macro" buttons on the "Commands" tab to your favourite macros, since I have created specific macros myself which are stored with my custom key commands.

Feel free to ask for help if you have any questions.

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Tue Feb 18, 2020 10:24 am
by dr
fantastic - thank you

Re: Touch OSC control for Cubase 10.5 Pro

Posted: Wed Feb 19, 2020 5:41 am
by Vicken
misjavw thank you.