How can elements be aligned at the same height?

Discussions about our next-generation scoring application, Dorico.
Post Reply
User avatar
Pepinello
Member
Posts: 203
Joined: Mon Mar 27, 2017 10:29 am
Location: Vienna/Austria
Contact:

How can elements be aligned at the same height?

Post by Pepinello »

Hi!

I am struggling with engraving (like always, when I am writing a post ;) )

So, the questions are as follows:

FIRST:
What is this command for?
Bildschirmfoto 2020-10-26 um 10.23.50.png
(38.25 KiB) Not downloaded yet
It should align rehearsal marks and tempo marks at a given height. My results are like this (without any alingments in properties):
Bildschirmfoto 2020-10-26 um 10.23.59.png
(8.76 KiB) Not downloaded yet
What am I doing wrong?

SECOND:
Is there any possibility to align text elements on the same hight aside the rule of thumb basis? Have a look:
Bildschirmfoto 2020-10-26 um 10.25.09.png
(11.02 KiB) Not downloaded yet
This is the result Dorico offers.

As far as I understood the concept of Dorico, it calculates with minimum gaps relatively to something around. I never can see the absolute distance eg. to the staff etc. So I didn’t find out how to align elements exactly to each other. Does anybody has some hints? I would be glad. Thanks!! :D

User avatar
Pepinello
Member
Posts: 203
Joined: Mon Mar 27, 2017 10:29 am
Location: Vienna/Austria
Contact:

Re: How can elements be aligned at the same height?

Post by Pepinello »

Another example:
Bildschirmfoto 2020-10-26 um 19.56.11.png
(61.45 KiB) Not downloaded yet
lead is a staff text (shift-x), leg is a playing technique text (shift-p). Both text styles have a given minimum gap of »1« in engraving options, no adjustment in the properties panel, same font, same font size. And it doesn’t matter, where I anchor the texts (rest or note), the difference of the gap height remains. I simply cannot find out, how to align these different text styles on the same height.

User avatar
Daniel at Steinberg
Moderator
Posts: 18833
Joined: Mon Nov 12, 2012 10:35 am
Contact:

Re: How can elements be aligned at the same height?

Post by Daniel at Steinberg »

The option to align rehearsal marks and tempos at the same vertical position will only take effect if the rehearsal mark is set to appear in its usual place to the right of the fixed preamble at the start of the staff; if you have the rehearsal mark aligned with the systemic barline, the option doesn't apply.

Aligning those disparate items – which happen to look like text but only one of which is actually genuinely a text item – is not simple to do, because the way that Dorico draws them is so different, and the information available concerning things like the actual baseline of the text is not necessarily consistent for all of them. This is something that might change in the future, but it's hard to say when that would be.

Playing techniques and Shift+X text are also two such items that are drawn using two different methods and so the measurement relative to the staff is relative to a different point in the text (to the baseline for the Shift+X text, and to the bottom of the actual bounding rect for the playing technique). In this case, you might find it preferable to combine these two markings into a single item, by overriding the text shown in the playing technique via Properties.

User avatar
Pepinello
Member
Posts: 203
Joined: Mon Mar 27, 2017 10:29 am
Location: Vienna/Austria
Contact:

Re: How can elements be aligned at the same height?

Post by Pepinello »

Thanks a lot for your answer, Daniel.

Its interesting, but changing the settings according to the usual position doesn’t have any effect. Look here:
Bildschirmfoto 2020-10-26 um 21.27.23.png
(29.41 KiB) Not downloaded yet
Bildschirmfoto 2020-10-26 um 22.15.00.png
(16.56 KiB) Not downloaded yet
(Comment to your last paragraph: The two text styles are close in order to show the problem. I know, that I could override the text, but that would be a workaround for hundreds of similar situation in this symphony. So I thought its worth to ask before ;) )

I have realized, that in Dorico there are no magnetic auxiliary lines or absolute rulers in order to have an indication to align objects precisely. But I have a suggestion (I hope, my english is good enough to explain my suggestion)

Let say there is an object anchored at a given grid point in a staff, e.g. a staff text. So this object is placed with a defined gap between staff and/or notes above the staff. Normally the alignment in properties panel is shown as X:0, Y:0, no matter which position Dorico has calculated for this object (according to engraving options, minimum distances, distances to other objects, avoid collisions and so on). I think it would be helpful to know the absolute distance from the staff, too. Or the view option to switch from »relative« to »absolute« alignment.

Example:

Objects 1 and 2: some text, minimum distance to staff: 1, distance to other objects 1/2

Object 1 is placed above an empty bar. Its placed 1 above the staff. Dorico shows its calculated position: e. g. X=0, Y=1 (instead of 0/0 like now)
Object 2 is placed above a busy bar, lots of high notes, leger lines etc.: the object placed 1/2 above the highest note. Dorico shows the calculated position: X=0, Y=3 3/4 (instead of 0/0) – (»3 3/4« is just a phantasy number.)
So, if you want to align objects 1 and 2 you easily know what to do, because Y=1 and Y=3 3/4 are both absolute distances from the same coordinate axis. In this example I can set Y of object 1 to 3 3/4 to reach the same position like object 2 instead of finding out that object 2 should have X=0, Y=2 3/4 to have the same hight like object 1 which still has X=0, Y=0.
Do you understand me?
Last edited by Pepinello on Mon Oct 26, 2020 10:16 pm, edited 1 time in total.

User avatar
Daniel at Steinberg
Moderator
Posts: 18833
Joined: Mon Nov 12, 2012 10:35 am
Contact:

Re: How can elements be aligned at the same height?

Post by Daniel at Steinberg »

Yes, I understand where you're coming from, and I agree it would be useful to be able to see the absolute distance from the staff somehow. It's difficult because, as I explained above, the measurement is not relative to the same position on two items that look to you as a user to be the same, e.g. two things that look like text items in the same font at the same size may in fact be completely different internally, and one may be measured from its baseline (i.e. ignoring any descenders) while the other by its bounding box (i.e. including any descenders).

User avatar
Pepinello
Member
Posts: 203
Joined: Mon Mar 27, 2017 10:29 am
Location: Vienna/Austria
Contact:

Re: How can elements be aligned at the same height?

Post by Pepinello »

I understand, what you are talking about. I am not a software developer, just a user. And I guess that companies like Adobe or Serif have discussed similar problems for years. So I am sure, that your team will find good solutions, too. Looking forward to it. ;)

Post Reply

Return to “Dorico”

Who is online

Users browsing this forum: benwiggy, clario, Lillie Harris, PjotrB, rkrentzman and 8 guests