Fixing unwanted granulation/aliasing at high frequencies

Find topics on computers, studios and music-related hardware.
Post Reply
Torquemada
New Member
Posts: 1
Joined: Mon Jun 17, 2019 9:29 pm
Contact:

Fixing unwanted granulation/aliasing at high frequencies

Post by Torquemada » Mon Jun 17, 2019 9:44 pm

Can anyone give me advice about how to avoid granulation/aliasing with higher frequency notes? I usually start my channel at -12db, but when I play certain notes for certain patches, I get this granulation, that almost sounds like little pebbles bouncing around in the patch. I've read sometimes that has to do with the quality of the samples in a VST/synth. Advice?

User avatar
MattiasNYC
Grand Senior Member
Posts: 4142
Joined: Thu Dec 16, 2010 9:27 am
Contact:

Re: Fixing unwanted granulation/aliasing at high frequencies

Post by MattiasNYC » Tue Jun 18, 2019 3:33 pm

Can you share an example so we can hear the problem? I don't really understand what you're describing...
Nuendo 10.2.2 build 396 / Lynx TWO-B / Windows 10 Pro 64-bit / Ryzen 1700 3.6GHz (oc) / 16GB Corsair Vengeance DDR4@3200MHz / Radeon VII / ASUS x370-A mobo/ 500GB WD Blue system drive ::::: iZotope RX 7/ Phoenixverb Surround / DaVinci Resolve

artygun
New Member
Posts: 1
Joined: Tue Jun 18, 2019 7:25 pm
Contact:

Re: Fixing unwanted granulation/aliasing at high frequencies

Post by artygun » Tue Jun 18, 2019 7:29 pm

Can you share an example so we can hear the problem? I don't really understand what you're describing..

Post Reply

Return to “Computer/Studio Hardware & Setup”

Who is online

Users browsing this forum: No registered users and 2 guests