Nuendo 10 Dolby surround sound setup

Find topics on computers, studios and music-related hardware.
Post Reply
New Member
Posts: 1
Joined: Wed May 22, 2019 7:16 pm

Nuendo 10 Dolby surround sound setup

Post by lalitmahajanz » Wed May 22, 2019 7:30 pm

Hey hi ppl...I was looking up for a new DAW for my studio ...currently I am using behringer x32 with cubase I want to work on audio video production with nuendo 10 Dolby surround......can I use Behringer X32 as my audio interface and 5.1/7.1 Dolby surround sound mixer???

Any suggestions would be appreciated!

User avatar
Grand Senior Member
Posts: 3701
Joined: Thu Dec 16, 2010 9:27 am

Re: Nuendo 10 Dolby surround sound setup

Post by MattiasNYC » Thu May 23, 2019 1:54 pm

Do you really mean that you are going to encode to Dolby specifically, or are you just looking to do 5.1 / 7.1 surround in general? Those are two different things.

Nuendo has built-in surround panners and you can use those when mixing. All you have to do is set up the correct main output channel size and route your signals accordingly. All you need on the hardware side is enough outputs.

If you need bass management and control over delaying channels/speakers etc that can be done in the Control Room section with the bass management plugin.

Perhaps I'm not fully understanding your question...
Nuendo 7.1.4 / Lynx TWO-B / Windows 10 Pro 64-bit / Ryzen 1700 3.7GHz (oc) / 16GB Corsair Vengeance DDR4@3200MHz / Nvidia GTX 660 / ASUS x370-A mobo/ 500GB WD Blue system drive / Crucial BX100 250GB SSD media / spinners for library/backup ::::: iZotope RX / Phoenixverb Surround / DaVinci Resolve / Faderport / Applied Acoustics UltraAnalog / my pet pony Frank

Post Reply

Return to “Computer/Studio Hardware & Setup”

Who is online

Users browsing this forum: No registered users and 10 guests