Page 1 of 1

[SOLVED] audio & bluetooth in Cubasis 2.7

Posted: Thu Apr 25, 2019 11:24 am
by Romio072
Привет, Cubasis 2.7 при подключении к аудиосистеме через блютус выдает очень плохой звук , сравнимый cо звуком динамика телефона, в ранних версиях все работало отлично, версия 2.7 исправьте пожалуйста баг

Hi, Cubasis 2.7 when connected to the audio system via bluetooth gives a very bad sound, comparable to the sound of the speaker phone, in earlier versions everything worked fine, version 2.7, please fix it

Re: audio & bluetooth in Cubasis 2.7

Posted: Thu Apr 25, 2019 2:44 pm
by LSlowak
Hi, Cubasis 2.7 when connected to the a ... ase fix it

Hi Romio072,

Thanks for your message.

Here are the steps to connect your bluetooth audio device with Cubasis:

Pre-Requisite
- Please make sure "Bluetooth" is enabled in the iPad "Settings"
- Please make sure your BT device is paired with the iPad


1) Launch Cubasis
2) Go to "Setup/Audio"
3) Enable "Bluetooth/AirPlay Output" in the "Bluetooth/AirPlay" tab

Please let us know if this solves the issue.

Best,
Lars

Re: audio & bluetooth in Cubasis 2.7

Posted: Thu Apr 25, 2019 5:09 pm
by Romio072
в настройках айпад блютус включён, при активации кнопки- блютус айрплей в Cubasis связь с jbl теряется... в ранних версиях Cubasis все работало нормально..

In the settings, the bluetooth is turned on, when you activate the bluetooth bluetooth button in Cubasis, the connection with jbl is lost ... in early versions of Cubasis, everything worked fine ..

Re: audio & bluetooth in Cubasis 2.7

Posted: Thu Apr 25, 2019 7:15 pm
by Romio072
Всё))) разобрался, надо снять а потом заново активировать галку , всё заработало)

All))) figured out, it is necessary to remove, then re-activate the checkbox, it all worked)

Re: [SOLVED] audio & bluetooth in Cubasis 2.7

Posted: Fri Apr 26, 2019 6:21 am
by LSlowak
Hi Romio072,

Thanks for the update, glad to hear the problem is solved!

Best,
Lars