Automatic project sample rate change

Post Reply
jpanic
New Member
Posts: 9
Joined: Mon Jun 22, 2015 1:11 pm
Contact:

Automatic project sample rate change

Post by jpanic » Tue Jan 15, 2019 10:31 pm

Cubasis is changing each project sample rate to 16 kHz whenever I use Bluetooth headphones (Bose QC35). This has not always been like that, if I recall correctly, so it must have changed with a Cubasis update. I activated Bluetooth / Airplay output via Setup > Audio after having connected the headphones to the iPad, other apps like GarageBand work perfectly. Any help is appreciated.

iPad Pro 10,5“ / iOS 12.1.1 / Cubasis 2.7 / Böse Firmware 2.5.3

User avatar
LSlowak
Steinberg Employee
Posts: 2647
Joined: Thu Aug 08, 2013 12:36 pm
Contact:

Re: Automatic project sample rate change

Post by LSlowak » Wed Jan 16, 2019 10:59 am

Hi jpanic,

Thanks for your message.

With the latest update, v 2.7, Cubasis provides and adjusts the project sample rate matching to the device in use.

You did mention that the sample rate switches to 16 kHz in your case.
Please clarify this, since Cubasis allows to switch between 44.1/48/96 kHz (depending on the devices in use).

Thanks,
Lars
Lars Slowak - Project Management & Team lead Cubasis
Steinberg Media Technologies GmbH
Hamburg, Germany
Check out Steinberg on YouTube, Twitter and Facebook

sptma
New Member
Posts: 3
Joined: Sun Sep 01, 2013 9:17 pm
Contact:

Re: Automatic project sample rate change

Post by sptma » Mon Feb 04, 2019 12:05 am

I have he same effect with QC35 II. Cubasis changes the sample rate to 16k because of the hardware configuration, so says the message, in similar wording. Starting Cubasis empty helps, but that setting unfortunately needs to be changed again every time you start Cubasis. Btw, I have seen Cubasis wreck midi tracks by transposing it about one or two octaves down.

User avatar
LSlowak
Steinberg Employee
Posts: 2647
Joined: Thu Aug 08, 2013 12:36 pm
Contact:

Re: Automatic project sample rate change

Post by LSlowak » Mon Feb 04, 2019 10:09 am

sptma wrote:
Mon Feb 04, 2019 12:05 am
I have he same effect with QC35 II. Cubasis changes the sample rate to 16k because of the hardware configuration, so says the message, in similar wording. Starting Cubasis empty helps, but that setting unfortunately needs to be changed again every time you start Cubasis. Btw, I have seen Cubasis wreck midi tracks by transposing it about one or two octaves down.
Hi sptma,

Please find our dedicated article about the sample rate change right here.

Please provide us with a detailed bug report to reproduce the MIDI octave issue you've experienced.
If you have a short video or project which is helpful to reproduce the use, please share the download link with us via private message.

Thanks,
Lars
Lars Slowak - Project Management & Team lead Cubasis
Steinberg Media Technologies GmbH
Hamburg, Germany
Check out Steinberg on YouTube, Twitter and Facebook

jpanic
New Member
Posts: 9
Joined: Mon Jun 22, 2015 1:11 pm
Contact:

Re: Automatic project sample rate change

Post by jpanic » Wed Feb 06, 2019 9:42 am

Hi Lars,

I cannot be more precise than I already was. I receive a message “The project's sample rate was changed to 16kHz” whenever opening a Cubasis file with my QC35 wirelessly connected to my iPad Pro. I have a screenshot showing this, but this adds no additional input. The hardware cannot be the problem, as mentioned in your post above, so this is a software issue from my point of view.

How can I solve this?

Thanks
jpanic

User avatar
Hiltmann
Steinberg Employee
Posts: 199
Joined: Mon Jan 07, 2013 11:41 am
Contact:

Re: Automatic project sample rate change

Post by Hiltmann » Thu Feb 07, 2019 10:03 am

Hi jpanic,

Can you send us your screenshot ?

You mean the QuietComfort 35 Wireless headphones II ?

best Jan
Jan Hiltmann, Test Engineer - Content
Steinberg Media Technologies GmbH
Hamburg, Germany

jpanic
New Member
Posts: 9
Joined: Mon Jun 22, 2015 1:11 pm
Contact:

Re: Automatic project sample rate change

Post by jpanic » Thu Feb 07, 2019 7:00 pm

Hi Jan,

no, sorry, not the second generation (“II”), but the first generation are the headphones I mean.

See attached file.

Thanks
jpanic
Attachments
61D8A6DB-6173-4504-B85C-FAC54AE7A5F2.jpeg
(63.46 KiB) Not downloaded yet

User avatar
Hiltmann
Steinberg Employee
Posts: 199
Joined: Mon Jan 07, 2013 11:41 am
Contact:

Re: Automatic project sample rate change

Post by Hiltmann » Wed Feb 13, 2019 11:32 am

Hi Jpanic,

Thanks for the screenshot and your information !

It's on our list CB-4612 > Cubasis 2.8

best
Jan
Jan Hiltmann, Test Engineer - Content
Steinberg Media Technologies GmbH
Hamburg, Germany

Post Reply

Return to “Cubasis”

Who is online

Users browsing this forum: No registered users and 5 guests