[SOLVED] Connection probs after IOS 10.3
-
- Junior Member
- Posts: 121
- Joined: Wed Dec 16, 2015 12:02 pm
- Contact:
Re: [bug] Connection probs after IOS 10.3
I can connect to Cubase Pro 9.0.2 from my iPad with iC Pro/iOS 10.3.2. I have to try to connect a couple of times, maybe quit and restart the app and then it will work. Not ideal, but sort of usable.
I deleted then reinstalled the iCPro device in Cubase. Don't know if this helped.
I deleted then reinstalled the iCPro device in Cubase. Don't know if this helped.
Desktop:
Gigabyte Z390 Designare/i9 9900k/OSX10.14.5/Cubase Pro 10.0.40/32 GB RAM/MSI AMD R480x/SSD's/Metric Halo ULN-8/UAD2 Quad
Laptop:
MacBook Pro 8,2/OSX10.12.6/8GB RAM/SSD/Metric Halo ULN-2
Gigabyte Z390 Designare/i9 9900k/OSX10.14.5/Cubase Pro 10.0.40/32 GB RAM/MSI AMD R480x/SSD's/Metric Halo ULN-8/UAD2 Quad
Laptop:
MacBook Pro 8,2/OSX10.12.6/8GB RAM/SSD/Metric Halo ULN-2
-
- Member
- Posts: 699
- Joined: Sun Jan 30, 2011 10:21 pm
- Contact:
Re: [bug] Connection probs after IOS 10.3
I cant connect with either iphone or ipad on 10.3.2 to Cubase Pro 9.0.20 no matter how many restarts and reboots! Its just broken.
Devs, did Apple actually break their programming interface for sockets or was it that Cubase IC was using a deprecated library function that Apple disabled with 10.3?
Devs, did Apple actually break their programming interface for sockets or was it that Cubase IC was using a deprecated library function that Apple disabled with 10.3?
Windows 10 Build 1909 , Gigabyte x58 Soc FORCE, 16gb Ddr4 RAM, Intel 5930x, Cubase 10.5, Dorico 2.2 1 OCTO & 1 Quad UAD, Protools 12.7, Vienna Ensemble Pro 5 with 32gb Slave PC.
- fenderchris
- Senior Member
- Posts: 1353
- Joined: Mon Dec 20, 2010 7:30 pm
- Location: Planet Palmer
- Contact:
Re: [bug] Connection probs after IOS 10.3
It does not work with 10.3.2 but apparently does work with 10.3.3 Public Beta.mart wrote:I cant connect with either iphone or ipad on 10.3.2 to Cubase Pro 9.0.20 no matter how many restarts and reboots! Its just broken.
See here:
viewtopic.php?f=174&t=116603&start=25
Chris
The Archers - give it a rest already!
Windows-10 Pro 64-bit v.1903.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Nuendo-10.2.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.
The Archers - give it a rest already!
Windows-10 Pro 64-bit v.1903.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Nuendo-10.2.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.
-
- Member
- Posts: 567
- Joined: Mon Jun 17, 2013 7:29 pm
- Contact:
Re: [bug] Connection probs after IOS 10.3
Some people reported that 10.3.2 fixed it for them. Others (myself included) didn't have that experience. That may be the same with 10.3.3.fenderchris wrote:It does not work with 10.3.2 but apparently does work with 10.3.3 Public Beta.mart wrote:I cant connect with either iphone or ipad on 10.3.2 to Cubase Pro 9.0.20 no matter how many restarts and reboots! Its just broken.
See here:
viewtopic.php?f=174&t=116603&start=25
I'm highly skeptical that the solution doesn't involve application code, since none of my other network dependent apps were broken, only iC Pro.
Control Room: Cubase 10.0.30 | Windows 7 64 bit | 24 gigs memory | Yamaha TF5 | Mackie MCU
Edit Station: Cubase 9.5.41 | Windows 7 64 bit | 24 gigs memory | UR 22 | CMC TP-QC-AI-CH
Keyboard Station: Cubase 10.0.30 | Windows 10 64 bit | 16 gigs memory | UR 22| CMC TP-AI
~~~~~~~~~~~~~~~~~~~~~~~
Chris Duncan
Atlanta, GA, USA, Earth
Edit Station: Cubase 9.5.41 | Windows 7 64 bit | 24 gigs memory | UR 22 | CMC TP-QC-AI-CH
Keyboard Station: Cubase 10.0.30 | Windows 10 64 bit | 16 gigs memory | UR 22| CMC TP-AI
~~~~~~~~~~~~~~~~~~~~~~~
Chris Duncan
Atlanta, GA, USA, Earth
- fenderchris
- Senior Member
- Posts: 1353
- Joined: Mon Dec 20, 2010 7:30 pm
- Location: Planet Palmer
- Contact:
Re: [bug] Connection probs after IOS 10.3
I'm with you there. And even if connection is re-established with 10.3.3 the app will still not function properly due to the fact that it fails completely in Cue Mix mode if a Nuendo project contains a VCA fader (probably true with Cubase too).ChrisDuncan wrote:Some people reported that 10.3.2 fixed it for them. Others (myself included) didn't have that experience. That may be the same with 10.3.3.fenderchris wrote:It does not work with 10.3.2 but apparently does work with 10.3.3 Public Beta.mart wrote:I cant connect with either iphone or ipad on 10.3.2 to Cubase Pro 9.0.20 no matter how many restarts and reboots! Its just broken.
See here:
viewtopic.php?f=174&t=116603&start=25
I'm highly skeptical that the solution doesn't involve application code, since none of my other network dependent apps were broken, only iC Pro.
Chris
The Archers - give it a rest already!
Windows-10 Pro 64-bit v.1903.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Nuendo-10.2.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.
The Archers - give it a rest already!
Windows-10 Pro 64-bit v.1903.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Nuendo-10.2.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.
-
- Junior Member
- Posts: 63
- Joined: Sat Jan 22, 2011 2:27 pm
- Contact:
Re: [bug] Connection probs after IOS 10.3
However, that is not the subject of this thread.fenderchris wrote: And even if connection is re-established with 10.3.3 the app will still not function properly due to the fact that it fails completely in Cue Mix mode if a Nuendo project contains a VCA fader (probably true with Cubase too).
I am not on the beta prog, so I will wait till 10.3.3 comes out fully.
Cubase Pro, 14-core i9, 64gb Ram, Focusrite Clarett 8Pre, Windows 10, SSDs everywhere, Samsung CF701 34 monitor - well, you got to spoil yourself!
- Konrath
- Member
- Posts: 219
- Joined: Wed Feb 02, 2011 8:53 pm
- Contact:
Re: [bug] Connection probs after IOS 10.3
OFI: For me with 10.3.2 it didn't work too but with 10.3.3 it does.ChrisDuncan wrote:fenderchris wrote: Some people reported that 10.3.2 fixed it for them. Others (myself included) didn't have that experience. That may be the same with 10.3.3.
I'm highly skeptical that the solution doesn't involve application code, since none of my other network dependent apps were broken, only iC Pro.
"I don't understand why people are afraid of new ideas. I'm afraid of the old ones." - John Cage
Cubase 10.0.30 / Spectralayers 6.0.10 / Sound Forge Pro 11 / Cubase iC Pro / Win 10 1903 64bit / Tascam us20x20/ Cakewalk 3UMG / Akai MPK88 / Doepfer R2M
Cubase 10.0.30 / Spectralayers 6.0.10 / Sound Forge Pro 11 / Cubase iC Pro / Win 10 1903 64bit / Tascam us20x20/ Cakewalk 3UMG / Akai MPK88 / Doepfer R2M
- fenderchris
- Senior Member
- Posts: 1353
- Joined: Mon Dec 20, 2010 7:30 pm
- Location: Planet Palmer
- Contact:
Re: [bug] Connection probs after IOS 10.3
Quite right, but it is ancillary info that may be of interest to many people hoping to use the app again, seeming not you, but hey, it's not all about you (or me for that matter).Joss wrote:However, that is not the subject of this thread.fenderchris wrote: And even if connection is re-established with 10.3.3 the app will still not function properly due to the fact that it fails completely in Cue Mix mode if a Nuendo project contains a VCA fader (probably true with Cubase too).
I am not on the beta prog, so I will wait till 10.3.3 comes out fully.

Chris
The Archers - give it a rest already!
Windows-10 Pro 64-bit v.1903.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Nuendo-10.2.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.
The Archers - give it a rest already!
Windows-10 Pro 64-bit v.1903.
PC: i7 Quad core 2.66GHz, 24GB ram, SSD drives.
Screens: LG 4K 3440x1440, AG-Neovo 1280x1024 (x2).
Hardware: RME FireFace UFX, MR816CSX (x2), SmartAV Tango-1 + 12-fader expansion, MOTU Midi Express 128, UAD-2 Quad, Lexicon PCM-91, Lexicon MPX-550, TC-Fireworx, Roland V-Drums TD-20X, Nektar Panorama P1.
Software: Nuendo-8.1.10, Nuendo-10.2.10, Wavelab-Elements-9.5, Halion-6, Halion Sonic 3, Kontakt-5, Cubase iCPro for iPhone and Android (killed by its parents at birth), Omnisphere, Trillian.
- LSlowak
- Steinberg Employee
- Posts: 2831
- Joined: Thu Aug 08, 2013 12:36 pm
- Contact:
Re: [bug] Connection probs after IOS 10.3
Hi all,
We've released a status update regarding the topic.
Please find it here: viewtopic.php?f=174&t=118901
Thanks,
Lars
We've released a status update regarding the topic.
Please find it here: viewtopic.php?f=174&t=118901
Thanks,
Lars
- LSlowak
- Steinberg Employee
- Posts: 2831
- Joined: Thu Aug 08, 2013 12:36 pm
- Contact:
Re: [bug] Connection probs after IOS 10.3
Dear all,
On July 20, 2017, Apple released the latest iOS update version 10.3.3 and we are pleased to announce that this resolves former connectivity issues between Cubase iC Pro and supported Steinberg DAWs.
Please follow this link to learn more:
viewtopic.php?f=174&t=121062
Best,
Lars
On July 20, 2017, Apple released the latest iOS update version 10.3.3 and we are pleased to announce that this resolves former connectivity issues between Cubase iC Pro and supported Steinberg DAWs.
Please follow this link to learn more:
viewtopic.php?f=174&t=121062
Best,
Lars
Who is online
Users browsing this forum: No registered users and 1 guest