R/W controls inconsistent in Q mode.

This section is about Steinberg's CMC controllers
Post Reply
User avatar
BriHar
Senior Member
Posts: 2159
Joined: Wed Dec 15, 2010 11:10 pm
Contact:

R/W controls inconsistent in Q mode.

Post by BriHar »

Both CMC-CH and CMC-QC have Read and Write buttons. When either button on the CH or QC is pressed, it toggles the state of the read or write as expected, and in EQ or MIDI mode the R or W button on the QC faithfully shows the state as on the CH. In Q mode however, when the R on the CH is pressed on, it lights up and the Read is toggled in the software, but the R button on the QC remains dark.

To summarize, Only in Q mode, toggling the R or W on the CH will not cause the states of the same controls to toggle on the QC.

P.S. both controllers and tools are the latest versions, and Cubase 7.02
"...yes I think it can be easily done, just take everything down to Highway 61."

Sun Point Studio Turbenthal, Switzerland


Cubase Pro 10.5.20 - 64bit | Cubase AI 10.5 | WaveLab 9.0.10 - 64bit | PT10 | UR28M | UR44 | CMC-PD/4xFD/QC/AI/CH/TP | BCF2000 | Contour Shuttlexpress | Graphire Tablet | Cubendo Custom Keyboard | Lenovo E31 Workstation:Xeon E3-1225V2/3.2GHz; 14GB DDR3 SDRAM; 2x Intel-Flash520 SSD 180GB (C:/D:);1TB 7200rpm Sata3 (F:); DVD RW (E:); Ext. 3TB USB3 Freecom + WD 1TB; Nvidea GeForce GT 630 4GB DDR3 Video Ram AGP PCIE | Win 10 Pro 64 Bit

Post Reply

Return to “Steinberg CMC Series”

Who is online

Users browsing this forum: No registered users and 1 guest