UR-RT4 playing DSP reverb out to speakers

This section is about Steinberg's UR and UR-RT USB audio interfaces product range
Post Reply
dpolcino
Junior Member
Posts: 70
Joined: Thu Jan 27, 2011 9:26 am
Contact:

UR-RT4 playing DSP reverb out to speakers

Post by dpolcino » Sat Nov 10, 2018 1:44 am

Cubase Pro 9.5.4.1 Windows 10
When I track, say a vocal, the reverb is coming out of MIX 1 which is connected to my speakers, even though I have my Mains switch off in the control room panel. Hardware setup is sending reverb to Output 2 (my headphones mix), which works, but it's ALSO going out to the speakers. Weird. Any ideas?

PeppaPig
Member
Posts: 911
Joined: Sat Jan 24, 2015 5:39 pm
Contact:

Re: UR-RT4 playing DSP reverb out to speakers

Post by PeppaPig » Sat Nov 10, 2018 10:27 pm

I'm assuming that this shares some similarities with the UR44 (I gave mine away a couple of years ago so I'm working from memory) there is a (not obvious) trick to setting up hardware sends etc, in the Cubase mixer you have to make hardware slots viewable, an entry for the UR44 then appears which you edit to bring up certain monitor options. Even then it's not obvious once you're in there because some clickable/moveable elements don't look like clickable/movable elements. :? Still, between the painful seting up and occasional driver/firmware issues - I loved my UR44.
Cubase Pro 9.5, Pro9.0.20. WaveLab 9 EL. UA Apollo Quad FW, UA PCI Octo, UA Satelite Quad, Adam T5V, Golden Audio pre73 DLX, Behringer ADA8200, Intel i7 6850x@4.2Ghz (6C/12T), Asus x99 Deluxe II, AMD 6450 HD, Windows 10 Pro, Samsung 860 and 850 SSDs, 64Gb RAM - Melodyne Studio, Komplete ultimate 11, Halion 6, GA,GA2,GA3,GA4 (+sp), OZ6, OZ7, OZ8 adv, Neutron Adv, BFD3, SoundToys rack, Panorama P1, M-Audio Oxygen, Yamaha YPP55 - outboard: PRO VLAII, Digitech Time machine RDS4000, 1950s Ferrograph Series 5, Mics: AKG C1000S, Rode NT2A and M5 pair, SE2200A, SE X1R, Fame-VT67 (cheap valve U67 clone), Heil PR20&PR22, Behringer Mic2200 used for reamping with a bit of nastiness!

dpolcino
Junior Member
Posts: 70
Joined: Thu Jan 27, 2011 9:26 am
Contact:

Re: UR-RT4 playing DSP reverb out to speakers

Post by dpolcino » Mon Nov 12, 2018 3:56 am

Thanks, I'll look again. Pretty sure it's a bug. I mean have my monitors OFF in control room, reverb shouldn't be sneaking around and coming out!

Post Reply

Return to “Steinberg UR Series”

Who is online

Users browsing this forum: No registered users and 3 guests